NANOSKIN SUPER CUT Dilution Ratios & User Guide
슈퍼 컷
NANOSKIN SUPER CUT — Exterior : Polishes, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/nanoskin/super-cut
NANOSKIN 슈퍼 컷 — Exterior : Polishes, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/nanoskin/super-cut
A heavy-duty cutting compound formulated for lacquer and hard enamel automotive paints, intended to remove major paint defects and deep sanding marks. Contains no silicone, wax, or fillers, and is rated to remove 1,500–3,000 grit wet sanding marks.
라커 및 하드 에나멜 자동차 도장용 강력 컷팅 컴파운드로, 주요 도장 결함과 깊은 샌딩 자국 제거에 사용합니다. 실리콘, 왁스, 필러를 포함하지 않으며 1,500–3,000 그릿 웻 샌딩 자국 제거에 적합합니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
- pH
- neutral (7)
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-09-07
How it works
- Petroleum solvent — Dissolves tar and grease; best not left to dwell on paint.
- Abrasive particles — Fine particles cut the surface to remove defects and oxidation.
- nonionic surfactants — Ionic types of the surfactants used in this product.
- Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Water | 64742-47-8 | Solvent |
| Aluminum Oxide | 1344-28-1 | Abrasive |
| Hydrotreated middle petroleum | 64742-46-7 | Solvent |
| C12-C14 Isoalkanes | 68551-19-9 | Solvent |
| Glycerine | 56-81-5 | Humectant |
| Polyoxyethylenesorbitan | 9005-64-5 | Nonionic surfactant |
| Oleic Acid | 112-80-1 |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Heavy-duty compound for lacquer and hard enamel paints
- Removes major paint defects and deep sanding marks
- Rated for 1,500–3,000 grit wet sanding mark removal
- Silicone-, wax-, and filler-free
- Pairs with MICROBUFF Cutting Pad at 4800 opm
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Polishes (primary) | RTU | 1:0 |
Usage
- Work on a clean, cool surface out of direct sunlight.
- Apply SUPER CUT evenly onto a MICROBUFF Cutting Pad.
- Buff at 4800 opm in 2’×2’ sections, cleaning the pad often with a brush or compressed air.
- Wipe residue away with a soft, clean microfiber towel.
핵심 특징
- 라커 및 하드 에나멜 도장용 강력 컴파운드
- 주요 도장 결함 및 깊은 샌딩 자국 제거
- 1,500–3,000 그릿 웻 샌딩 자국 제거 가능
- 실리콘·왁스·필러 무함유
- 마이크로버프 컷팅 패드와 4800 opm에서 사용
사용법
- 직사광선을 피한 깨끗하고 식은 표면에서 작업합니다.
- 마이크로버프 컷팅 패드에 슈퍼 컷을 고르게 도포합니다.
- 4800 opm으로 60×60cm 구획씩 작업하며 브러시나 압축공기로 패드를 자주 청소합니다.
- 부드럽고 깨끗한 마이크로파이버 타월로 잔여물을 닦아냅니다.
Also known as: 나노스킨, NANOSKIN SUPER CUT, NS SUPER CUT, SC, NANOSKIN SC, NS SC, 나노스킨 슈퍼 컷, 나노스킨 SC
Sources
Related products
More from NANOSKIN
More Polishes products
- SWAG WATER SPOT REMOVER GEL+
- EWOCAR One Cut
- OPTI-COAT Optimum Hyper All In One Polish & Protect (AIO) Spray
- 3D Car Care Glass Polish
- Kamikaze Collection THE CUT PLUS
- Kamikaze Collection THE FINISH