HOME RUN
홈 런
HOME RUN is a professional-grade, water-based heavy-duty degreaser with a concentrated formula adjustable across three dilution levels for tasks ranging from engine degreasing to general surface cleaning. It penetrates and removes grease, grime, and oxidation from a wide range of surfaces including engines, wheels, concrete, tools, and kitchen areas without leaving a film behind. Do not use on glass, acrylic, auto paint, leather, or natural stone.
HOME RUN은 전문가용 수성 강력 탈지제로, 세 가지 희석 단계로 엔진 탈지부터 일반 청소까지 다양한 작업에 활용할 수 있는 농축 포뮬러입니다. 엔진, 휠, 콘크리트, 공구, 주방 표면 등에서 기름때, 오염물, 산화 피막을 잔여물 없이 제거합니다. 유리, 아크릴, 자동차 도장면, 가죽, 천연석에는 사용하지 마십시오.
- Brand
- NANOSKIN
- Categories
- Exterior : Degreaser&Dewaxing
- Primary dilution
- 1:4~1:19
Key features
- Concentrated formula adjustable to three dilution levels
- Water-based; leaves no film after cleaning
- Removes grease, grime, and oxidation from multiple surface types
- Compatible with floor scrubbers, pressure washers, and parts washers
- Promotes superior paint adhesion on bare or rusted metal before coating
- Do not use on glass, auto paint, leather, or natural stone
Dilution
- Exterior : Degreaser&Dewaxing — 1:4~1:19 (1:4-19) (primary)
Usage
- Dilute to the required strength: 4 parts water to 1 part product for heavy-duty degreasing, 9:1 for medium-duty, or 19:1 for general cleaning.
- Test on a small, inconspicuous area before full application.
- Spray the diluted solution directly onto the surface to be cleaned.
- Allow the solution to dwell for 30 seconds, then rinse thoroughly.
- For stubborn soils, agitate with a scrub brush or sponge before rinsing.
- Do not allow the product to dry on the surface; repeat if necessary.
핵심 특징
- 3단계 희석 조절 가능한 농축 포뮬러
- 수성 기반으로 세정 후 잔여 피막 없음
- 다양한 표면에서 기름때·오염물·산화 피막 제거
- 바닥 세척기, 고압 세척기, 부품 세척기와 호환
- 도장 전 나금속·녹슨 금속 표면의 도장 밀착력 향상
- 유리, 자동차 도장면, 가죽, 천연석에는 사용 불가
사용법
- 용도에 맞게 희석합니다: 강력 탈지는 물 4:제품 1, 중강도는 9:1, 일반 세정은 19:1.
- 본격적인 사용 전 눈에 띄지 않는 소면적에서 먼저 테스트합니다.
- 희석액을 세정할 표면에 직접 분사합니다.
- 30초간 작용하도록 둔 후 충분히 헹굽니다.
- 완고한 오염물은 헹구기 전에 스크럽 브러시나 스펀지로 문질러 줍니다.
- 표면에서 건조되지 않도록 주의하고, 필요 시 과정을 반복합니다.