Graphene Ceramic Detail Spray
그래핀 세라믹 디테일 스프레이
NANOSKIN Graphene Ceramic Detail Spray is a spray-on, wipe-off quick detailer formulated with graphene-oxide ceramic resins that add gloss, depth, and hydrophobic protection to all exterior surfaces. Ready-to-use, it serves multiple functions including dust removal, waterless washing, drying aid, clay bar or AUTOSCRUB lubricant, and maintenance spray for ceramic, graphene, or wax coatings.
나노스킨 그래핀 세라믹 디테일 스프레이는 산화 그래핀 세라믹 레진이 함유된 스프레이 타입의 퀵 디테일러로, 모든 외장 표면에 광택과 깊이감, 발수 보호를 더해줍니다. 희석 없이 바로 사용 가능하며, 먼지 제거, 워터리스 세차, 드라잉 에이드, 클레이 바·오토스크럽 윤활제, 세라믹·왁스 코팅 유지 관리 등 다양한 용도로 활용됩니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Quick Detailer, Exterior : Drying Aid, Exterior : Rinseless&Waterless
Key features
- Graphene-oxide ceramic resin formula for gloss and depth
- Spray-on, wipe-off application — ready to use
- Functions as clay bar and AUTOSCRUB lubricant
- Usable as drying aid on a freshly rinsed wet vehicle
- Removes dust, fingerprints, and smudges without washing
- Maintenance spray compatible with ceramic, graphene, and wax coatings
- Relentless hydrophobic water beading
Usage
- General use: spray a fine mist onto one panel at a time or directly onto a microfiber towel.
- Wipe with a clean dry microfiber towel, then flip to a fresh side and wipe again for a streak-free shine.
- Repeat on the remaining exterior panels.
- Drying aid: after rinsing the vehicle while still dripping wet, mist each panel, glass, and plastic surface.
- Use a clean drying towel to dry the surface completely.
- Clay or AUTOSCRUB lubricant: on a clean surface, spray a fine mist onto one panel at a time including glass.
- With light pressure, glide the clay bar or AUTOSCRUB over the lubricated surface until smooth, then wipe dry with a microfiber towel.
핵심 특징
- 광택과 깊이감을 더하는 그래핀 산화물 세라믹 레진 포뮬라
- 스프레이 후 닦아내는 간편한 RTU 사용법
- 클레이 바 및 오토스크럽 윤활제로 활용 가능
- 헹군 직후 젖은 차량에 드라잉 에이드로 사용 가능
- 세차 없이 먼지, 지문, 오염물 제거
- 세라믹·그래핀·왁스 코팅 유지 관리 스프레이로 호환
- 강력한 발수 기능
사용법
- 일반 사용: 한 번에 한 패널씩 또는 마이크로파이버 타월에 직접 가볍게 분사합니다.
- 깨끗하고 건조한 마이크로파이버 타월로 닦은 후, 타월을 뒤집어 반대 면으로 다시 닦아 얼룩 없는 광택을 냅니다.
- 차량 외장의 나머지 패널에도 동일하게 반복합니다.
- 드라잉 에이드로 사용 시: 차량을 헹군 직후 물방울이 맺힌 상태에서 각 패널, 유리, 플라스틱 부위에 분사합니다.
- 깨끗한 드라잉 타월로 표면 전체를 완전히 건조시킵니다.
- 클레이 또는 오토스크럽 윤활제로 사용 시: 깨끗한 표면에 한 패널씩 (유리 포함) 고르게 분사합니다.
- 가벼운 압력으로 클레이 바 또는 오토스크럽을 표면 위에서 부드럽게 밀고, 매끄러워지면 마이크로파이버 타월로 닦아냅니다.