GLIDE
글라이드
GLIDE is a silicone-free, body-shop-safe instant detail spray that removes light contaminants and polishing residue while leaving surfaces clean and glossy with zero residue. Its wax- and polymer-free formula makes it ideal as a clay bar and AUTOSCRUB lubricant, as well as a final wipe-down cleaner prior to ceramic coating application. GLIDE is safe on all paint finishes, glass, chrome, wheels, trims, and interior surfaces.
GLIDE는 실리콘 무함유 보디샵 안전 인스턴트 디테일 스프레이로, 가벼운 오염물과 폴리싱 잔여물을 제거하면서도 잔여물 없이 표면을 깨끗하고 광택 있게 유지합니다. 왁스·폴리머 무함유 포뮬러로 클레이 바 및 AUTOSCRUB 윤활제로 이상적이며, 세라믹 코팅 전 최종 마무리 세정제로도 사용됩니다. 모든 도장면·유리·크롬·휠·몰딩·내장재에 안전합니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Quick Detailer
- Primary dilution
- 1:7~1:10
Key features
- Silicone-free, body shop safe formula
- Removes light contaminants and compound/polish residue
- Clay bar and AUTOSCRUB lubricant
- Prepares surface for ceramic coating application
- No wax or polymer — zero residue finish
- Safe on paint, glass, chrome, wheels, trim, and interior surfaces
- Multi-surface application including interior body filler dust
Dilution
- Exterior : Quick Detailer — 1:7~1:10 (1:7-10) (primary)
Usage
- Shake the bottle well. Use only on a clean, cool surface and out of direct sunlight.
- For instant detail spray: mist GLIDE onto one section at a time, spread evenly with a clean dry microfiber towel, then flip to a dry side and wipe the surface clean.
- For AUTOSCRUB use: wash the vehicle thoroughly first to remove dust, sand, and dirt.
- Mist GLIDE evenly onto the surface, then work the AUTOSCRUB pad with a dual-action orbital polisher at low speed with light pressure.
- Wipe off any residue with a clean microfiber towel, then apply wax or glaze as desired.
핵심 특징
- 실리콘 무함유 보디샵 안전 포뮬러
- 가벼운 오염물 및 컴파운드·폴리시 잔여물 제거
- 클레이 바 및 AUTOSCRUB 윤활제
- 세라믹 코팅 전 표면 준비
- 왁스·폴리머 무함유 — 잔여물 없는 마무리
- 도장면·유리·크롬·휠·몰딩·내장재 모두 안전
- 실내 바디필러 분진 제거 포함 다용도 활용
사용법
- 사용 전 병을 충분히 흔들어 줍니다. 깨끗하고 식은 표면에, 직사광선을 피해 사용합니다.
- 인스턴트 디테일 스프레이 용도: GLIDE를 한 섹션씩 분사하고 깨끗하고 건조한 마이크로파이버 타월로 고르게 편 후 타월의 건조한 면으로 마무리 닦아냅니다.
- AUTOSCRUB 용도: 먼저 차량에서 먼지, 모래, 오염물을 충분히 세차하여 제거합니다.
- 표면에 GLIDE를 고르게 분사한 후 듀얼 액션 오비탈 폴리셔에 AUTOSCRUB 패드를 장착하여 저속, 약한 압력으로 작업합니다.
- 깨끗한 마이크로파이버 타월로 잔여물을 닦아낸 후 필요에 따라 왁스나 글레이즈를 도포합니다.