슈퍼 컷
SUPER CUT
NANOSKIN · NANOSKIN SUPER CUT · NS SUPER CUT · SC · NANOSKIN SC · NS SC · 나노스킨 슈퍼 컷 · 나노스킨 SC
라커 및 하드 에나멜 자동차 도장용 강력 컷팅 컴파운드로, 주요 도장 결함과 깊은 샌딩 자국 제거에 사용합니다. 실리콘, 왁스, 필러를 포함하지 않으며 1,500–3,000 그릿 웻 샌딩 자국 제거에 적합합니다.
- 브랜드
- 나노스킨
- 카테고리
- Exterior : Polishes
- 기본 희석 비율
- RTU
- pH
- neutral (7)
핵심 특징
- 라커 및 하드 에나멜 도장용 강력 컴파운드
- 주요 도장 결함 및 깊은 샌딩 자국 제거
- 1,500–3,000 그릿 웻 샌딩 자국 제거 가능
- 실리콘·왁스·필러 무함유
- 마이크로버프 컷팅 패드와 4800 opm에서 사용
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 직사광선을 피한 깨끗하고 식은 표면에서 작업합니다.
- 마이크로버프 컷팅 패드에 슈퍼 컷을 고르게 도포합니다.
- 4800 opm으로 60×60cm 구획씩 작업하며 브러시나 압축공기로 패드를 자주 청소합니다.
- 부드럽고 깨끗한 마이크로파이버 타월로 잔여물을 닦아냅니다.
A heavy-duty cutting compound formulated for lacquer and hard enamel automotive paints, intended to remove major paint defects and deep sanding marks. Contains no silicone, wax, or fillers, and is rated to remove 1,500–3,000 grit wet sanding marks.
Key features
- Heavy-duty compound for lacquer and hard enamel paints
- Removes major paint defects and deep sanding marks
- Rated for 1,500–3,000 grit wet sanding mark removal
- Silicone-, wax-, and filler-free
- Pairs with MICROBUFF Cutting Pad at 4800 opm
Usage
- Work on a clean, cool surface out of direct sunlight.
- Apply SUPER CUT evenly onto a MICROBUFF Cutting Pad.
- Buff at 4800 opm in 2’×2’ sections, cleaning the pad often with a brush or compressed air.
- Wipe residue away with a soft, clean microfiber towel.