G5 Pro
지파이브 프로
NANOSKIN G5 Pro is an ultra-graphene ceramic coating formulated with spherical silica and graphene in a solvent-based carrier that chemically bonds to the vehicle's clear coat, producing a mirror-like, deep-gloss finish. The self-leveling formula provides up to 5 years of hydrophobic protection against contaminants, UV, and water spotting, and can be applied DIY-style with a foam applicator using a one-towel removal system.
나노스킨 G5 프로는 구형 실리카와 그래핀을 결합한 솔벤트 기반의 초고성능 그래핀 세라믹 코팅으로, 차량의 클리어 코트에 화학적으로 결합하여 거울 같은 고광택 마무리를 구현합니다. 셀프 레벨링 포뮬라로 오염물, UV, 물자국에 대한 최대 5년의 발수 보호 성능을 발휘하며, 폼 어플리케이터와 단일 타월 제거 방식으로 DIY 시공이 가능합니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Coating
Key features
- Spherical silica and graphene dual-function formula
- Chemical bond to clear coat for up to 5 years durability
- Deep mirror-like gloss and rich color enhancement
- Relentless hydrophobic water beading — repels contaminants and water spots
- Self-leveling, long work time with no streaking
- One-towel wipe-off removal system
- Suitable for DIY and professional application
Usage
- Wash the vehicle thoroughly to remove all dust, sand, and dirt.
- Use NANOSKIN GLIDE with a clay bar or AUTOSCRUB pad to remove bonded surface contaminants.
- If necessary, polish the paintwork to correct any imperfections.
- Wipe all painted surfaces with a microfiber cloth dampened with IPA 70% to remove oil and polish residues.
- Apply 10–15 drops of G5 Pro to the foam applicator, spread evenly over a 4'x4' section, and allow 10–15 minutes for the coating to flash and produce a haze.
- Remove the haze with a microfiber cloth and continue section by section until the whole vehicle is coated.
핵심 특징
- 구형 실리카와 그래핀의 이중 기능 포뮬라
- 클리어 코트에 화학 결합, 최대 5년 내구성
- 깊은 거울 광택과 선명한 색상 표현
- 오염물과 물자국을 방어하는 강력한 발수 성능
- 셀프 레벨링 설계 — 긴 작업 시간, 얼룩 없는 마무리
- 타월 한 장으로 닦아내는 단순한 제거 방식
- DIY 및 전문가 시공 모두 적합
사용법
- 먼지, 모래, 이물질을 제거하기 위해 차량을 완전히 세차합니다.
- 나노스킨 GLIDE와 클레이 바 또는 오토스크럽 패드를 사용하여 도장면에 결합된 오염물을 제거합니다.
- 필요한 경우 도장면의 결함을 제거하기 위해 연마(폴리싱) 작업을 시행합니다.
- IPA 70%를 마이크로파이버 천에 묻혀 도장면 전체를 닦아 오일과 연마재 잔류물을 제거합니다.
- 폼 어플리케이터에 G5 프로를 10~15방울 적하하여 약 120×120cm 구역에 고르게 도포하고, 10~15분간 코팅이 건조되어 흐림이 생길 때까지 기다립니다.
- 마이크로파이버 천으로 흐림 잔류물을 닦아내고, 차량 전체가 코팅될 때까지 구역별로 반복합니다.