SAM + HPC 2.0 - Ceramic Coating
샘 + HPC 2.0 - 세라믹 코팅
SAM combined with HPC 2.0 is a layered, PFAS-free nano protection system designed to deliver gloss, hydrophobicity, and durability of up to about four years or 60,000 km. SAM forms a Self-Assembled Monolayer that bonds chemically with the surface, while HPC 2.0 sits on top as a hybrid polysiloxane and polymer film for a wet-look gloss and silky touch. Together they help defend paint against chemicals, UV, abrasion, and environmental fallout.
SAM과 HPC 2.0의 조합은 PFAS 프리 나노 보호막을 적층 구조로 구성한 시스템으로, 광택, 발수성과 함께 최대 약 4년 또는 60,000 km 수준의 내구성을 목표로 합니다. SAM은 표면에 화학적으로 결합하는 Self-Assembled Monolayer를 형성하고, HPC 2.0은 그 위에 폴리실록산과 폴리머 하이브리드 막을 더해 웻룩 광택과 실키한 촉감을 만들어 줍니다. 두 제품의 시너지는 화학물질, UV, 마모, 환경 오염으로부터 도장면을 보호합니다.
- Brand
- Labocosmetica
- Categories
- Exterior : Coating
Key features
- SAM forms an ultra-thin self-organized protective film
- About 20 percent active resin SAM repels water, dirt, and limescale
- Chemical and UV resistance
- Adds gloss and color depth
- Easy, even application
- HPC 2.0 hybrid polysiloxane and polymer formula
- Three-dimensional gloss and wet look
- Silky finish, smoother and lower friction
- HPC 2.0 protection up to about 24 months or 30,000 km
- Self-cleaning effect keeps cars cleaner longer
- Matte-finish safe
- Dust Out tech allows outdoor application
- I Forgive You tech tolerates application errors
Usage
- Prep the paint by decontaminating with SIDERO, polishing if needed, and degreasing with VERITAS, working below about 25 degrees C and out of direct sunlight.
- Apply SAM first in a criss-cross pattern, wait for the flash, then level with a clean microfiber.
- After the recommended wait, layer HPC 2.0 in a criss-cross pattern over sections up to about 60 by 60 cm.
- Let it flash, level and buff with a clean microfiber, keep water off for at least about 12 hours, and allow about 24 hours for full cure.
핵심 특징
- SAM이 자가 조직화된 초박형 보호막 형성
- 약 20 퍼센트 활성 레진의 SAM이 물·오염·석회 차단
- 화학·UV 저항성
- 광택과 색상 깊이 강화
- 균일하고 손쉬운 도포
- HPC 2.0 폴리실록산·폴리머 하이브리드 포뮬러
- 3차원 깊이의 광택과 웻룩
- 실키 마감, 부드러움과 낮은 마찰
- HPC 2.0 보호력 최대 약 24개월 또는 30,000 km
- 셀프 클리닝 효과로 청결 유지
- 매트 마감에 안전
- Dust Out 기술로 실외 작업 가능
- I Forgive You 기술로 시공 실수 보정
사용법
- SIDERO로 탈오염하고 필요 시 폴리싱, VERITAS로 탈지한 뒤 약 25도씨 이하·직사광선이 없는 환경에서 도장을 준비합니다.
- 먼저 SAM을 크로스 해칭 방식으로 도포하고 플래시가 보이면 깨끗한 마이크로파이버로 레벨링합니다.
- 권장 대기 시간 후 HPC 2.0을 약 60 x 60 cm 구역에 크로스 해칭 방식으로 적층합니다.
- 플래시 후 깨끗한 마이크로파이버로 레벨링·버핑하고, 약 12시간 이상 물을 피하며 약 24시간 후 완전 경화에 도달합니다.