STC - Ceramic Coating
STC - 세라믹 코팅
STC is a high-performance ceramic sealant combining about 70 percent physical and 30 percent chemical action for long-lasting defense against scratches, road salt, tar, acid rain, pollution, and UV. Silicon supports adhesion while titanium dioxide adds self-cleaning behavior and chemical resistance, and the ceramic film balances hardness with flexibility for a deep vitreous gloss. PFAS-free and VOC compliant.
STC는 약 70 퍼센트 물리적·30 퍼센트 화학적 작용을 결합한 고성능 세라믹 실런트로, 스크래치, 도로 염분, 타르, 산성비, 오염, UV에 오래 지속되는 보호를 제공합니다. 실리콘이 밀착력을 보조하고 이산화티타늄(TiO2)이 셀프 클리닝과 화학 저항성을 더하며, 세라믹 막은 경도와 유연성의 균형으로 깊이 있는 유리질 광택을 만들어 줍니다. PFAS 프리이며 VOC 규정을 준수합니다.
- Brand
- Labocosmetica
- Categories
- Exterior : Coating
Key features
- Long-lasting ceramic protection, about 70 percent physical and 30 percent chemical
- Resists scratches, chemical fallout, and UV
- Hydrophobic surface for easier washing
- Three-dimensional gloss with rich color
- PFAS-free and VOC compliant per Directive 2004/42/EC and UNI EN ISO 11890-1:2008
Usage
- Prep the paint by decontaminating with SIDERO, polishing as needed, then degreasing with VERITAS, working below about 25 degrees C and out of direct sunlight.
- Place 2 to 3 drops of STC on a coating pad and spread in a criss-cross pattern across the panel.
- Wait for the rainbow-sheen flash, level with a short-pile microfiber, then buff with a long-pile microfiber.
- Keep water off for at least about 12 hours, full cure about 24 hours, and consider HPC as a topper for added gloss and elasticity.
핵심 특징
- 약 70 퍼센트 물리적·30 퍼센트 화학적 작용의 장기 지속 세라믹 보호
- 스크래치, 화학적 오염, UV에 강한 저항성
- 발수성 표면으로 세차·유지가 쉬움
- 색상의 생동감을 살리는 3차원 광택
- PFAS 프리, VOC 규정 준수 (Directive 2004/42/EC, UNI EN ISO 11890-1:2008)
사용법
- SIDERO로 탈오염하고 필요 시 폴리싱, VERITAS로 탈지한 뒤 약 25도씨 이하·직사광선이 없는 환경에서 도장을 준비합니다.
- 코팅 패드에 STC를 2에서 3방울 떨어뜨려 크로스 해칭 방식으로 펴 바릅니다.
- 무지개 빛 플래시가 나타나면 단모 마이크로파이버로 레벨링한 뒤 장모 마이크로파이버로 버핑합니다.
- 약 12시간 이상 물과의 접촉을 피하고 완전 경화는 약 24시간이며, 추가 광택과 탄성은 HPC 토퍼로 보강할 수 있습니다.