Auto Glym Polar Seal Dilution Ratios & User Guide

Auto Glym Polar Seal dilution ratio and pH specification chart

폴라 씰

Auto Glym Polar Seal — Exterior : Coating, acid pH, base dilution 1:5. At 1:5, mix about 200 ml of Auto Glym Polar Seal per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/auto-glym/polar-seal

Auto Glym 폴라 씰 — Exterior : Coating, pH acid, 기본 희석 1:5. 1:5 기준 물 1L당 Auto Glym 폴라 씰 약 200ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/auto-glym/polar-seal

A pH neutral hydrophobic sealant designed to go on through a pressure washer foam gun. It lays down a water-beading layer that helps the car sheet off water and finishes with a glossy look. Polar Seal is the third step of the Autoglym Polar wash, following Polar Blast and Polar Wash.

고압세척기 폼건으로 도포하도록 만들어진 pH 중성 소수성 실란트입니다. 도장면에 발수층을 입혀 물이 잘 흘러내리도록 돕고 광택 있는 마감을 남깁니다. 오토글림 폴라 세차 공정의 세 번째 단계로, 폴라 블래스트와 폴라 워시 다음에 사용합니다.

Brand
Auto Glym
Categories
Exterior : Coating
Primary dilution
1:5
pH
acid (4)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-07-31

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)1:51:5

Usage

  1. Make sure bodywork and wheels are cool and out of direct sunlight.
  2. Pre-wash with Polar Blast and shampoo with Polar Wash to clear dirt and contamination.
  3. Pour up to 40ml of Polar Seal into the foam bottle and add at least 200ml of water.
  4. Spray across the clean, wet exterior, avoiding the windscreen.
  5. Rinse the car straight away so the product does not dry on.
  6. Dry the vehicle with a cloth such as Autoglym InstaDry to avoid water spotting.
  7. Wipe the windscreen and wiper blades with Autoglym Fast Glass to prevent smearing.

핵심 특징

  • 발수성 코팅 실란트
  • 고압세척기용 저발포 포뮬러
  • 건조 시간 단축에 도움
  • pH 중성, 왁스 위에도 사용 가능
  • 광택 있는 도장 마감

사용법

  1. 차체와 휠이 만졌을 때 시원하고 직사광선이 닿지 않는 곳에서 시작합니다.
  2. 폴라 블래스트로 사전 세척하고 폴라 워시로 샴푸 세차해 오염을 제거합니다.
  3. 폼 보틀에 폴라 씰 40ml 이하를 붓고 물 200ml 이상을 더합니다.
  4. 젖은 차량 외부에 분사하되 앞 유리에는 직접 닿지 않게 합니다.
  5. 표면에서 마르지 않도록 곧바로 헹궈줍니다.
  6. InstaDry 같은 천으로 닦아 물자국을 막습니다.
  7. 오토글림 패스트 글래스로 앞 유리와 와이퍼를 닦아 얼룩이 남지 않게 합니다.

Also known as: 오토글림, 오토그림, Autoglym Polar Seal, PS, Autoglym PS, 오토글림 폴라 씰, 오토글림 PS, PSL001

한국어로 보기

Sources

Related products

More from Auto Glym

More Coating products

Explore more