Find Your Detail · 제품 카탈로그 · 브랜드 · 실사용 영상 · 소개

Labocosmetica 샘 + HPC 2.0 - 세라믹 코팅 사용 가이드

Labocosmetica 샘 + HPC 2.0 - 세라믹 코팅 희석비 pH 스펙 카드

SAM + HPC 2.0 - Ceramic Coating

SAM과 HPC 2.0의 조합은 PFAS 프리 나노 보호막을 적층 구조로 구성한 시스템으로, 광택, 발수성과 함께 최대 약 4년 또는 60,000 km 수준의 내구성을 목표로 합니다. SAM은 표면에 화학적으로 결합하는 Self-Assembled Monolayer를 형성하고, HPC 2.0은 그 위에 폴리실록산과 폴리머 하이브리드 막을 더해 웻룩 광택과 실키한 촉감을 만들어 줍니다. 두 제품의 시너지는 화학물질, UV, 마모, 환경 오염으로부터 도장면을 보호합니다.

브랜드
Labocosmetica
카테고리
Exterior : Coating
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-09-07

작용 방식

  • 알콕시실란 — 수분과 반응해 표면에 화학적으로 결합합니다.
  • 실리콘 피막(광택·발수) — 광택과 발수를 주지만, 도장 작업 전에는 제거가 필요합니다.
  • 용제 기반 — 유기 용제가 주로 쓰인 제품입니다. 실내·플라스틱에는 환기와 시험 도포를 권합니다.

공개 성분

성분CAS역할
Triethoxy(methyl)silane (MTES)1185-55-3피막 형성제
Siloxanes and silicones (silane-modified silicone)68037-85-4
Distillates (petroleum), hydrotreated light64742-47-8용제
Toluene108-88-3용제
Naphtha (petroleum), light alkylate64741-66-8용제
Methanol67-56-1용제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • SAM이 자가 조직화된 초박형 보호막 형성
  • 약 20 퍼센트 활성 레진의 SAM이 물·오염·석회 차단
  • 화학·UV 저항성
  • 광택과 색상 깊이 강화
  • 균일하고 손쉬운 도포
  • HPC 2.0 폴리실록산·폴리머 하이브리드 포뮬러
  • 3차원 깊이의 광택과 웻룩
  • 실키 마감, 부드러움과 낮은 마찰
  • HPC 2.0 보호력 최대 약 24개월 또는 30,000 km
  • 셀프 클리닝 효과로 청결 유지
  • 매트 마감에 안전
  • Dust Out 기술로 실외 작업 가능
  • I Forgive You 기술로 시공 실수 보정

사용법

  1. SIDERO로 탈오염하고 필요 시 폴리싱, VERITAS로 탈지한 뒤 약 25도씨 이하·직사광선이 없는 환경에서 도장을 준비합니다.
  2. 먼저 SAM을 크로스 해칭 방식으로 도포하고 플래시가 보이면 깨끗한 마이크로파이버로 레벨링합니다.
  3. 권장 대기 시간 후 HPC 2.0을 약 60 x 60 cm 구역에 크로스 해칭 방식으로 적층합니다.
  4. 플래시 후 깨끗한 마이크로파이버로 레벨링·버핑하고, 약 12시간 이상 물을 피하며 약 24시간 후 완전 경화에 도달합니다.

SAM combined with HPC 2.0 is a layered, PFAS-free nano protection system designed to deliver gloss, hydrophobicity, and durability of up to about four years or 60,000 km. SAM forms a Self-Assembled Monolayer that bonds chemically with the surface, while HPC 2.0 sits on top as a hybrid polysiloxane and polymer film for a wet-look gloss and silky touch. Together they help defend paint against chemicals, UV, abrasion, and environmental fallout.

Key features

  • SAM forms an ultra-thin self-organized protective film
  • About 20 percent active resin SAM repels water, dirt, and limescale
  • Chemical and UV resistance
  • Adds gloss and color depth
  • Easy, even application
  • HPC 2.0 hybrid polysiloxane and polymer formula
  • Three-dimensional gloss and wet look
  • Silky finish, smoother and lower friction
  • HPC 2.0 protection up to about 24 months or 30,000 km
  • Self-cleaning effect keeps cars cleaner longer
  • Matte-finish safe
  • Dust Out tech allows outdoor application
  • I Forgive You tech tolerates application errors

Usage

  1. Prep the paint by decontaminating with SIDERO, polishing if needed, and degreasing with VERITAS, working below about 25 degrees C and out of direct sunlight.
  2. Apply SAM first in a criss-cross pattern, wait for the flash, then level with a clean microfiber.
  3. After the recommended wait, layer HPC 2.0 in a criss-cross pattern over sections up to about 60 by 60 cm.
  4. Let it flash, level and buff with a clean microfiber, keep water off for at least about 12 hours, and allow about 24 hours for full cure.

다른 이름: 라보, Labo, 라보코스메티카, SAM + HPC 2.0, SAM HPC 2.0, Labo SAM HPC 2.0, Labocosmetica SAM + HPC 2.0, 샘 HPC 2.0, 라보코스메티카 샘 HPC 2.0

View in English

출처

  • Labocosmetica 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Labocosmetica의 다른 제품

  • LEALE - Medium compound
  • VARIUS - All Purpose Cleaner Ready to Use
  • RENOVA - Acidic Traffic Film Remover Shampoo for PPF and Wraps
  • DUCTILE - All purpose cleaner
  • VENERE - Glaze sealant
  • PRIMUS 2.0 - Alkaline foam prewash

같은 카테고리(Coating) 제품

  • EZ Car Care Graphene Wax
  • GYEON Q² Flash EVO
  • P&S Cherry Speed Wax
  • Ganbass Quin
  • Turtle Wax Hybrid Solutions Graphene Acrylic Trim Restorer
  • ADBL Wet Coat

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)