STC + HPC PRO - Ceramic Coating
STC + HPC PRO - 세라믹 코팅
STC combined with HPC PRO is a layered ceramic protection system pairing STC as the base sealant (with about 70 percent physical and 30 percent chemical action) and HPC PRO as a nano hydro-gel overcoat. STC delivers durable defense against scratches, UV, and contaminants, while HPC PRO adds a flexible, hydrophobic, antistatic polymer film that boosts gloss and helps panels stay cleaner longer.
STC와 HPC PRO 조합은 STC를 베이스 실런트로 (약 70 퍼센트 물리적·30 퍼센트 화학적 작용) 두고 HPC PRO를 나노 하이드로 젤 시스템 기반의 오버코트로 적층하는 세라믹 보호 시스템입니다. STC는 스크래치, UV, 오염물에 대해 오래 지속되는 보호를 제공하고, HPC PRO는 그 위에 유연하면서 발수성·정전기 방지 특성을 가진 폴리머 막을 형성해 광택을 강화하고 표면을 더 오래 깨끗하게 유지시켜 줍니다.
- Brand
- Labocosmetica
- Categories
- Exterior : Coating
Key features
- Resists scratches, road salt, tar, acid rain, pollution, and UV
- Hydrophobic, easier washing and upkeep
- Three-dimensional gloss and depth
- HPC adds resistance to chemicals, salt, and UV damage
- HPC repels water, dirt, and contaminants
- HPC antistatic action reduces dust pickup
- HPC amplifies color depth and gloss
- HPC works alone or as a topcoat over other Labocosmetica coatings
Usage
- Prep the paint by decontaminating, polishing if needed, and degreasing with VERITAS, working below about 25 degrees C and out of direct sunlight.
- Apply STC first as the foundation in a criss-cross pattern, wait for flash, then level with a clean microfiber.
- After the recommended cure or wait time, apply HPC PRO as the overcoat in a criss-cross pattern, let it flash, then level and buff.
- Keep water off for at least about 12 hours and allow about 24 hours for full cure; the layered STC and HPC PRO system delivers extended gloss, elasticity, and self-cleaning behavior.
핵심 특징
- 스크래치, 도로 염분, 타르, 산성비, 오염, UV에 저항
- 발수성: 세차와 유지 관리 용이
- 3차원 광택과 깊이감
- HPC가 화학물질·염분·UV 손상 저항 강화
- HPC가 물·오염·이물질 차단
- HPC 정전기 방지 작용으로 먼지 부착 감소
- HPC가 색상 깊이와 광택 강화
- HPC는 단독 또는 다른 라보코스메티카 코팅 위 탑코트로 사용
사용법
- 탈오염하고 필요 시 폴리싱, VERITAS로 탈지한 뒤 약 25도씨 이하·직사광선이 없는 환경에서 작업합니다.
- 먼저 STC를 베이스로 크로스 해칭 방식으로 도포하고, 플래시 후 깨끗한 마이크로파이버로 레벨링합니다.
- 권장 대기 시간 후 HPC PRO를 오버코트로 크로스 해칭 방식 도포하고 플래시 후 레벨링·버핑합니다.
- 약 12시간 이상 물을 피하고 완전 경화는 약 24시간이며, STC + HPC PRO 시스템은 광택·탄성·셀프 클리닝 효과를 강화해 줍니다.