RENOVA - Acidic Traffic Film Remover Shampoo for PPF and Wraps
레노바 - PPF 및 랩핑용 산성 트래픽 필름 리무버 샴푸
RENOVA is described as the first acidic-pH Traffic Film Remover shampoo developed for PPF, vinyl wraps, and sensitive coatings. It works into micro-pores to release embedded traffic film, mineral residue, and limescale while leaving protective layers undisturbed. Built around ethoxylated surfactants, chelating agents, and anti-redeposition stabilizers, it is VDA certified for thermo-sensitive automotive surfaces.
RENOVA는 PPF, 랩, 민감한 코팅을 위해 개발된 시장 최초의 산성 pH TFR 샴푸로 소개됩니다. 미세 기공 사이까지 침투해 박힌 트래픽 필름, 미네랄 잔여물, 석회 자국을 풀어주면서 보호막에는 영향을 주지 않습니다. 에톡시화 계면활성제, 킬레이트제, 재침적 방지 안정제를 기반으로 한 포뮬러이며 열민감성 자동차 표면을 위한 VDA 인증을 보유합니다.
- Brand
- Labocosmetica
- Categories
- Exterior : Bucket Car Shampoo, Exterior : PPF Maintenance
- Primary dilution
- 1:10~1:50
- pH
- acid
Key features
- Lifts embedded traffic film and hard-to-reach grime
- Compatible with PPF, satin PPF, wraps, coatings, and sensitive paint
- Dense foam keeps friction and micro-marring low
- Use as a maintenance shampoo or for spot decontamination
- Pairs with LIBERA in the 2PH+ wash cycle
- VDA certified for thermo-sensitive surfaces
Dilution
- Exterior : Bucket Car Shampoo — 1:10~1:50 (1:10-50) (primary)
- Exterior : PPF Maintenance — 1:200 (1:200)
Usage
- Dilute RENOVA about 1 to 5 for intensive spot work or up to 1 to 50 for routine shampoo washing.
- Apply through a foam cannon or via bucket and microfiber mitt, pairing with LIBERA as the alkaline step in the 2PH+ cycle.
- Wash one panel at a time so the dense lubricating foam can protect delicate film surfaces.
- Rinse thoroughly with a high-pressure rinse and dry with a microfiber towel.
핵심 특징
- 박힌 트래픽 필름과 손이 닿기 어려운 오염 제거
- PPF, 새틴 PPF, 랩, 코팅, 민감한 도장에 호환
- 농밀한 거품으로 마찰과 미세 마링 감소
- 유지 세차 또는 국소 제독에 모두 사용
- 2PH+ 사이클에서 LIBERA와 짝으로 활용
- 열민감성 표면을 위한 VDA 인증
사용법
- 강한 국소 처리에는 약 1대5, 일반 유지 세차에는 최대 1대50으로 RENOVA를 희석합니다.
- 폼 캐논 또는 버킷과 마이크로파이버 글러브로 도포하고, 2PH+ 사이클에서는 알칼리 단계인 LIBERA와 함께 사용합니다.
- 농밀한 윤활 거품이 민감한 필름을 보호할 수 있도록 패널 단위로 세차합니다.
- 고압수로 충분히 헹군 뒤 마이크로파이버 수건으로 건조합니다.