Super Glaze
슈퍼 글레이즈
인피니티 · 인피니티 왁스 · infinity · Infinity Wax Super Glaze · IW Super Glaze · SG · Infinity Wax SG · IW SG · 인피니티 왁스 슈퍼 글레이즈 · 인피니티 왁스 SG · IFW105
Super Glaze is a non-abrasive, water-based polish and glaze containing heavy filling agents and gloss-enhancing polymers that visually conceal light swirls, fine scuffs, and surface haze without cutting the clear coat. It provides a mild cleansing effect to remove minor surface contamination such as small tar spots and embedded residues, and leaves a short-term protective layer lasting approximately one week. The formula is also suitable for glass surfaces where it helps remove light water marks and improve clarity.
슈퍼 글레이즈는 클리어코트를 손상시키지 않고 미세 스크래치, 잔 흠집, 표면 헤이즈를 시각적으로 채워주는 충전제와 광택 향상 폴리머가 함유된 비연마성 수성 폴리시 및 글레이즈입니다. 경미한 표면 오염 제거와 함께 약 1주일 지속되는 단기 보호층을 남기며, 유리 표면의 물자국 제거에도 사용할 수 있습니다.
- Brand
- Infinity Wax
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
Key features
- Non-abrasive filling of swirls and fine scuffs
- Gloss-enhancing polymers improve colour depth and reflectivity
- Mild cleansing effect removes light surface contamination
- Short-term protective layer lasting approximately one week
- Water-based with no chalks, oils, or trim-staining residue
- Usable on glass to remove light water marks
- Applicable by hand or machine
Dilution
- Exterior : Polishes — RTU (1:0) (primary)
Usage
- Ensure the paintwork is clean and dry before use.
- Apply 3 to 4 pea-sized drops to a hand applicator and work the product into the paintwork.
- For machine use, apply 3 to 4 pea-sized drops and begin working in at speed 1 to 2.
- Remove by gentle buffing once the product has hazed; do not allow it to cure for more than 10 minutes.
- Not suitable for matte or satin paintwork, or vinyl wrap.
핵심 특징
- 미세 스크래치 및 잔 흠집의 비연마성 충전
- 색 깊이와 반사율을 향상시키는 광택 폴리머
- 경미한 표면 오염 제거를 위한 순한 세정 효과
- 약 1주일 지속되는 단기 보호층
- 수성 포뮬러, 분필·오일·트림 얼룩 성분 없음
- 유리 표면의 물자국 제거에도 사용 가능
- 수작업 및 기계 사용 모두 가능
사용법
- 사용 전 도장면이 깨끗하고 건조한 상태인지 확인하세요.
- 수작업 어플리케이터에 완두콩 크기 3~4방울을 덜어 도장면에 펴 바르세요.
- 기계 사용 시, 완두콩 크기 3~4방울을 사용하여 속도 1~2로 작업하세요.
- 제품이 하얗게 변하면 부드럽게 버핑하여 제거하되, 10분 이상 경화되지 않도록 주의하세요.
- 무광·새틴 도장 및 비닐 랩에는 사용하지 마세요.