Car Gods Sectus 3K Heavy Cutting Compound User Guide

Car Gods Sectus 3K Heavy Cutting Compound dilution ratio and pH specification chart

섹투스 3K 헤비 컷팅 컴파운드

Car Gods Sectus 3K Heavy Cutting Compound — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/car-gods/sectus-3k-heavy-cutting-compound

Car Gods 섹투스 3K 헤비 컷팅 컴파운드 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/car-gods/sectus-3k-heavy-cutting-compound

Car Gods Sectus 3K Heavy Cutting Compound is a deep-cutting abrasive compound designed to tackle heavy-duty paint correction, including deep scratches, thick oxidation, and sanding marks. Intended as the first step in a multi-stage correction sequence, it strips away severe defects to prepare the surface for finer compounds. The silicone-free, diminishing abrasive formula is low-dust and easy to clean up.

Car Gods 섹투스 3K 헤비 컷팅 컴파운드는 깊은 스크래치, 심한 산화, 샌딩 자국 등 심각한 도장 결함을 제거하는 강절삭 연마 컴파운드입니다. 다단계 교정 작업의 첫 번째 단계로 사용하며 세밀한 후속 작업을 위한 표면을 만들어 줍니다. 실리콘 무함유 분산 연마재 포뮬러로 분진이 적어 작업 후 정리가 간편합니다.

Brand
Car Gods
Categories
Exterior : Polishes
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-14

Key features

Usage

  1. Make sure the vehicle has been thoroughly washed and dried before starting.
  2. For best results, prepare the surface with Car Gods Panel Spray first.
  3. Shake the bottle well before use.
  4. Apply 3–4 pea-sized amounts of compound to the heavy cut pad, adding more for first-time pad priming.
  5. Work on one small section at a time: start at low polisher speed, increase speed to work the compound, then reduce speed to finish once the compound clears.
  6. Buff away any remaining haze with a clean, dry microfibre cloth before moving to the next panel.

핵심 특징

  • 깊은 스크래치 제거를 위한 강절삭력
  • 산화 및 샌딩 자국 제거
  • 다단계 도장 교정의 첫 번째 단계
  • 실리콘 무함유 분산 연마재 포뮬러
  • 낮은 분진·비산·잔여물 발생
  • 듀얼 액션 폴리셔 사용에 최적화

사용법

  1. 작업 전 차량을 깨끗이 세차하고 완전히 건조시킵니다.
  2. 최상의 결과를 위해 패널 스프레이로 표면을 먼저 전처리합니다.
  3. 사용 전 병을 충분히 흔들어 줍니다.
  4. 헤비 컷 패드에 완두콩 크기의 컴파운드를 3~4개 도포하며, 패드를 처음 사용하는 경우 더 많이 추가합니다.
  5. 한 번에 작은 구역씩 작업합니다. 낮은 속도로 시작해 속도를 높여 컴파운드를 작용시킨 후, 컴파운드가 투명해지면 속도를 낮춰 마무리합니다.
  6. 깨끗하고 건조한 마이크로파이버 천으로 남은 안개를 닦아낸 뒤 다음 패널로 이동합니다.

Also known as: 갓, gods, Car Gods Sectus 3K Heavy Cutting Compound, CG Sectus 3K Heavy Cutting Compound, Sectus 3K, Car Gods Sectus 3K, CG Sectus 3K, 카 갓즈 섹투스 3K 헤비 컷팅 컴파운드, 카 갓즈 섹투스 3K

한국어로 보기

Sources

Related products

More from Car Gods

More Polishes products

Explore more