ProStaff SAKIGAKE MIGAKIJUKU Abrasive and Coating User Guide

ProStaff SAKIGAKE MIGAKIJUKU Abrasive and Coating dilution ratio and pH specification chart

사키가케 미가키주쿠 어브레이시브 앤드 코팅

ProStaff SAKIGAKE MIGAKIJUKU Abrasive and Coating — Exterior : Polishes, alkali pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/prostaff/sakigake-migakijuku-abrasive-and-coating

ProStaff 사키가케 미가키주쿠 어브레이시브 앤드 코팅 — Exterior : Polishes, pH alkali. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/prostaff/sakigake-migakijuku-abrasive-and-coating

A two-part headlight and plastic restoration kit that first strips yellowing and cloudiness, then seals the surface with a glass-based coating. The abrasive base cleaner used with the supplied microfiber cloth brings back clarity, and the coating adds a clear gloss that holds off renewed yellowing from dirt and UV for roughly 12 months. Every item needed for the job is included, and it also works on unpainted black resin parts.

헤드라이트와 플라스틱의 황변·흐림을 먼저 제거한 뒤 유리계 코팅으로 표면을 보호하는 2액형 복원 세트입니다. 연마 성분이 들어간 베이스 클리너와 동봉 마이크로파이버 천으로 투명감을 되살리고, 코팅제가 맑은 광택을 더해 오염과 자외선에 의한 황변 재발을 약 12개월간 막아줍니다. 작업에 필요한 도구가 모두 들어 있으며 미도장 검은색 수지 부품에도 사용할 수 있습니다.

Brand
ProStaff
Categories
Exterior : Polishes, Exterior : Coating
pH
alkali
Last updated
2026-07-21

Key features

Usage

  1. Rinse sand and mud off the work area with water, then wipe the surface completely dry.
  2. Wear the supplied gloves, shake the base cleaner, and load a small amount onto the blue microfiber cloth.
  3. Polish in straight vertical and horizontal strokes, covering about 15 cm square at a time.
  4. Before the cleaner dries, wipe the surface clean with a fresh face of the blue cloth.
  5. Wrap the white cloth around the helper and apply the coating liquid to one side only.
  6. Spread the coating thinly in one direction, then leave it to air-dry for about two hours.

핵심 특징

  • 연마 베이스 클리너와 유리계 코팅제의 2액형 세트
  • 헤드라이트·램프 커버의 황변과 흐림 제거
  • 동봉 마이크로파이버 천으로 투명감 회복
  • 약 12개월간 유지되는 투명 피막
  • 미도장 검은색 수지 부품에도 사용 가능
  • 장갑·전용 천·도포용 헬퍼 포함

사용법

  1. 시공 부위의 모래와 진흙을 물로 씻어낸 뒤 물기를 완전히 닦아내세요.
  2. 동봉된 장갑을 끼고 베이스 클리너를 흔든 뒤 파란색 마이크로파이버 천에 소량만 묻히세요.
  3. 15cm 사방을 기준으로 세로와 가로 일정 방향으로 가볍게 문질러 닦아내세요.
  4. 클리너가 마르기 전에 파란색 천의 깨끗한 면으로 표면을 닦아 올리세요.
  5. 헬퍼에 흰색 천을 감고 코팅제를 천의 한쪽 면에만 묻히세요.
  6. 코팅제를 한 방향으로 얇고 균일하게 펴 바른 뒤 약 2시간 자연 건조하세요.

Also known as: 프로스태프, PROSTAFF SAKIGAKE MIGAKIJUKU Abrasive and Coating, 프로스태프 사키가케 미가키주쿠 어브레이시브 앤드 코팅, S132

한국어로 보기

Sources

Related products

More from ProStaff

More Polishes products

Explore more