Synergy 2
시너지 2
인피니티 · 인피니티 왁스 · infinity · Infinity Wax Synergy 2 · IW Synergy 2 · 인피니티 왁스 시너지 2 · IFW107
Infinity Wax Synergy 2 is a 2-year polysilazane ceramic coating engineered for both enthusiast and professional use, with an outdoor-safe sacrificial polymer layer that allows application on the driveway without risk of failure. It achieves 9H hardness when not washed for 7 days after application and leverages a hydrolysis curing process that uses ambient moisture to harden the coating faster. Its formulation also fills surface defects such as wash marring and swirls, delivering an exceptional gloss result even on unpolished paintwork.
인피니티 왁스 시너지 2는 실외 시공이 가능한 희생 폴리머 층을 갖춘 2년 내구성의 폴리실라잔 세라믹 코팅입니다. 시공 후 7일간 세차를 하지 않으면 9H 경도에 도달하며, 공기 중 수분을 이용한 가수분해 경화 방식으로 더욱 빠르게 굳습니다. 세차 미세 스크래치 등 표면 결함을 채워주어 폴리싱 없이도 뛰어난 광택을 발휘합니다.
- Brand
- Infinity Wax
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- 2-year durability with 9H hardness
- Outdoor-safe application via sacrificial polymer layer
- Hydrolysis curing using ambient moisture
- Fills wash marring and surface defects without polishing
- Strong water beading and sheeting
- Safe on all painted surfaces, vinyl wrap, and matte paintwork
- Vehicle usable within 30 minutes of application
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Thoroughly wash the vehicle and remove all tar and contamination; perform chemical decontamination and clay bar treatment if needed.
- Dry the vehicle completely, including door jambs and areas where water can collect.
- Apply Synergy Prep to one panel at a time using a fresh microfibre towel, wiping in straight lines to remove residual surfactants and light contamination.
- Apply 15–20 drops of Synergy 2 onto the supplied applicator pad to prime the surface, then work the coating in straight lines one panel at a time using a crosshatch pattern.
- Allow 30 seconds to 5 minutes before removing the coating residue with a short-pile microfibre towel.
- Once the whole vehicle is coated, buff with a plush edgeless towel, then avoid washing for 7 days.
핵심 특징
- 9H 경도의 2년 내구성
- 희생 폴리머 층으로 실외 시공 안전
- 공기 중 수분을 활용한 가수분해 경화
- 폴리싱 없이도 세차 흔적·표면 결함 보완
- 강력한 물방울 맺힘 및 흘러내림
- 도장면·비닐 랩·무광 도장 모두 안전
- 시공 후 30분 이내 차량 사용 가능
사용법
- 차량을 완전히 세척하고 타르 및 오염물을 제거하세요. 필요하면 화학적 오염 제거 및 클레이 바 작업을 진행하세요.
- 도어 틈새 등 물이 고일 수 있는 부분을 포함해 차량 전체를 완전히 건조시키세요.
- 새 마이크로파이버 타올로 한 번에 한 패널씩 시너지 프렙을 직선으로 닦아 잔류 계면활성제와 가벼운 오염을 제거하세요.
- 시너지 2를 공급된 어플리케이터 패드에 15~20방울 도포하여 패드를 적신 후, 한 번에 한 패널씩 상하 좌우 교차 방향으로 코팅을 펴 바르세요.
- 30초~5분 대기 후 짧은 파일의 마이크로파이버 타올로 코팅 잔여물을 제거하세요.
- 차량 전체 코팅 완료 후 풍성한 에지리스 타올로 마무리 버핑하고, 7일간 세차를 하지 마세요.