슈퍼 글레이즈
Super Glaze
인피니티 · 인피니티 왁스 · infinity · Infinity Wax Super Glaze · IW Super Glaze · SG · Infinity Wax SG · IW SG · 인피니티 왁스 슈퍼 글레이즈 · 인피니티 왁스 SG · IFW105
슈퍼 글레이즈는 클리어코트를 손상시키지 않고 미세 스크래치, 잔 흠집, 표면 헤이즈를 시각적으로 채워주는 충전제와 광택 향상 폴리머가 함유된 비연마성 수성 폴리시 및 글레이즈입니다. 경미한 표면 오염 제거와 함께 약 1주일 지속되는 단기 보호층을 남기며, 유리 표면의 물자국 제거에도 사용할 수 있습니다.
- 브랜드
- Infinity Wax
- 카테고리
- Exterior : Polishes
- 기본 희석 비율
- RTU
핵심 특징
- 미세 스크래치 및 잔 흠집의 비연마성 충전
- 색 깊이와 반사율을 향상시키는 광택 폴리머
- 경미한 표면 오염 제거를 위한 순한 세정 효과
- 약 1주일 지속되는 단기 보호층
- 수성 포뮬러, 분필·오일·트림 얼룩 성분 없음
- 유리 표면의 물자국 제거에도 사용 가능
- 수작업 및 기계 사용 모두 가능
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 사용 전 도장면이 깨끗하고 건조한 상태인지 확인하세요.
- 수작업 어플리케이터에 완두콩 크기 3~4방울을 덜어 도장면에 펴 바르세요.
- 기계 사용 시, 완두콩 크기 3~4방울을 사용하여 속도 1~2로 작업하세요.
- 제품이 하얗게 변하면 부드럽게 버핑하여 제거하되, 10분 이상 경화되지 않도록 주의하세요.
- 무광·새틴 도장 및 비닐 랩에는 사용하지 마세요.
Super Glaze is a non-abrasive, water-based polish and glaze containing heavy filling agents and gloss-enhancing polymers that visually conceal light swirls, fine scuffs, and surface haze without cutting the clear coat. It provides a mild cleansing effect to remove minor surface contamination such as small tar spots and embedded residues, and leaves a short-term protective layer lasting approximately one week. The formula is also suitable for glass surfaces where it helps remove light water marks and improve clarity.
Key features
- Non-abrasive filling of swirls and fine scuffs
- Gloss-enhancing polymers improve colour depth and reflectivity
- Mild cleansing effect removes light surface contamination
- Short-term protective layer lasting approximately one week
- Water-based with no chalks, oils, or trim-staining residue
- Usable on glass to remove light water marks
- Applicable by hand or machine
Usage
- Ensure the paintwork is clean and dry before use.
- Apply 3 to 4 pea-sized drops to a hand applicator and work the product into the paintwork.
- For machine use, apply 3 to 4 pea-sized drops and begin working in at speed 1 to 2.
- Remove by gentle buffing once the product has hazed; do not allow it to cure for more than 10 minutes.
- Not suitable for matte or satin paintwork, or vinyl wrap.