Dynax-Seam
다이낙스 심
Dynax-Seam is a fast-drying, brushable, flexible anti-corrosion seam sealer that protects welded joints, seams and overlapped panel work. It offers good resistance to abrasion, stone-chip damage and corrosion and has self-healing properties.
다이낙스-심은 빠르게 건조되는 브러시 도포형 유연 방청 심 실러로, 차량의 용접 조인트, 심, 패널 겹침부를 보호합니다. 마모와 스톤칩, 부식에 잘 견디고 피막이 자가 복원되는 특성을 갖춥니다.
- Brand
- Bilt Hamber
- Categories
- Exterior : Coating
Key features
- Fast-drying flexible seam sealer
- Self-healing anti-corrosion film
- Brushable application
- Protects welded joints, seams and overlaps
- Resists abrasion and stone-chip damage
Usage
- Make sure the seam or surface is clean, dry and free of loose rust, dirt and grease before application.
- Shake the aerosol can thoroughly for at least about 2 minutes before use.
- Attach the supplied extension tube or flexible probe to the nozzle for precise spraying into seams, joints and spot-welded areas.
- Spray a thin, even coat directly onto the seam or panel joint from about 15-20cm away.
- Let the solvent carrier flash off so the thixotropic wax film stays in place and self-levels into the seam.
- Wipe any excess from adjacent painted surfaces with a cloth dampened with white spirit before it fully cures.
- Reapply annually or when inspection shows the film has thinned, especially on vehicles used on salted winter roads.
핵심 특징
- 빠른 건조의 유연한 심 실러
- 자가 복원 방청 피막
- 브러시 도포 가능
- 용접 조인트·심·겹침부 보호
- 마모 및 스톤칩 손상에 강함
사용법
- 심·패널 조인트가 깨끗하고 건조하며 녹·먼지·유분이 없는지 확인합니다.
- 사용 전 에어로졸 캔을 최소 약 2분간 충분히 흔들어 줍니다.
- 심·조인트·스팟 용접부에 정밀하게 분사할 수 있도록 동봉된 연장 튜브 또는 플렉시블 프로브를 노즐에 장착합니다.
- 약 15~20cm 거리에서 심이나 패널 이음매에 얇고 균일하게 직접 분사합니다.
- 용제가 증발하도록 두면 요변성 왁스 피막이 심 안쪽에 셀프레벨링되어 자리잡습니다.
- 완전 경화 전, 주변 도장면에 묻은 잉여분은 화이트 스피릿을 적신 천으로 닦아냅니다.
- 매년 또는 피막이 얇아진 것이 확인되면 재도포하며, 겨울철 염해 도로를 자주 다니는 차량은 더 자주 재도포합니다.