Auto-Clay
오토 클레이
Auto-Clay is a detailing clay bar that lifts bonded contamination from paint, glass and other smooth surfaces without marring when used correctly. It comes as a 200g bar in three grades (Soft, Medium, Regular) and uses plain water as a lubricant.
오토클레이는 도장면, 유리 및 매끄러운 표면에 고착된 오염물을 마링 없이 들어내도록 만들어진 디테일링 클레이 바입니다. 200g 바 형태로 Soft, Medium, Regular 세 가지 강도로 제공되며 별도 윤활제 없이 깨끗한 물만으로 사용할 수 있습니다.
- Brand
- Bilt Hamber
- Categories
- Exterior : Polishes
Key features
- Lifts bonded contamination from paint
- Three grades: Soft, Medium, Regular
- Uses plain water as lubricant
- 200g long-life bar
- Will not scratch when used correctly
- About 4-5 average vehicle decontaminations per bar
Usage
- Wash and rinse the vehicle thoroughly so the paint is clean and free from loose grit.
- Keep the panel constantly wet with clean water; no separate clay lube is needed.
- Knead the clay bar in your palm to form a flat pad.
- Glide the clay back and forth across the wet panel with light pressure until it slides smoothly.
- Fold and re-knead the clay regularly to expose a clean surface and discard the bar if it is dropped.
- Rinse the panel and dry it with a soft microfibre towel.
- Follow with a cleanser or polish and a wax or sealant to refinish and protect the paint.
핵심 특징
- 도장면 고착 오염물 제거
- Soft, Medium, Regular 3등급
- 별도 윤활제 없이 물만으로 사용
- 200g 장수명 바
- 올바르게 사용 시 흠집 없음
- 평균 차량 기준 약 4~5회 사용
사용법
- 차량을 세차하고 충분히 헹궈 도장면에 이물이 남지 않게 합니다.
- 별도 루브가 필요 없으므로 깨끗한 물로 패널을 항상 젖은 상태로 유지합니다.
- 손바닥에서 클레이 바를 반죽해 평평한 패드 모양으로 만듭니다.
- 가벼운 압력으로 젖은 패널 위를 앞뒤로 문지르며, 부드럽게 미끄러질 때까지 작업합니다.
- 클레이를 자주 접어 깨끗한 면이 나오게 하고, 바닥에 떨어진 클레이는 폐기합니다.
- 패널을 헹구고 부드러운 마이크로파이버 타월로 건조합니다.
- 클렌저나 폴리시, 그리고 왁스 또는 실런트로 마감해 도장면을 보호합니다.