Bilt Hamber Auto-Mitt Noodle
빌트 햄버 오토-미트 누들 (누들 워시 미트)
Auto-Mitt Noodle is a double-sided microfibre long-noodle wash mitt with a water-retaining core, measuring about 19cm by 25cm and fitted with a cuff and drying loop. The long microfibre noodles deliver strong cleaning while the water-holding core flushes contaminants safely away from the paint during washing.
오토미트 누들은 물을 머금는 코어를 갖춘 양면 마이크로파이버 롱 누들 세차 미트로, 크기는 약 19cm × 25cm이고 고정 커프와 건조 루프가 달려 있습니다. 길게 뻗은 마이크로파이버 누들이 좋은 세정력을 내고, 물 저장 코어가 더 많은 물을 머금어 세차 중 오염물이 도장면에서 안전하게 씻겨 나가도록 돕습니다.
- Brand
- Bilt Hamber
- Categories
- Tools : Wash Supplies
Key features
- Double-sided plush microfibre mitt
- About 19cm by 25cm with fitted cuff and drying loop
- Long microfibre noodles for strong cleaning
- Water-retaining core flushes contaminants away
- Gentler on paint than traditional sponges
Usage
- Pre-rinse the vehicle thoroughly to flush off loose dirt and grit before contact washing.
- Set up a two-bucket wash with shampoo solution and a plain rinse bucket, ideally with grit guards.
- Soak the Auto-Mitt Noodle in the shampoo solution until fully saturated.
- Wash one panel at a time with light, straight passes and avoid pressing hard.
- Rinse the mitt in the plain-water bucket between panels to release trapped grit, then re-load with shampoo.
- Rinse the mitt with clean water after washing, hang it from the drying loop and machine-wash separately without softener as needed.
핵심 특징
- 양면 플러시 마이크로파이버 미트
- 약 19cm × 25cm, 고정 커프 및 건조 루프
- 긴 마이크로파이버 누들로 좋은 세정력
- 물 저장 코어가 오염물을 씻어냄
- 일반 스폰지보다 도장면에 부드러움
사용법
- 접촉 세차 전 차량을 충분히 프리린스해 느슨한 먼지와 이물을 씻어냅니다.
- 샴푸 버킷과 헹굼 버킷을 준비하는 투버킷 방식을 구성하고, 그릿가드를 함께 사용합니다.
- 오토미트 누들을 샴푸 용액에 충분히 적십니다.
- 한 번에 한 패널씩 가벼운 직선 동작으로 세차하며 강하게 누르지 않습니다.
- 패널 사이마다 미트를 헹굼 버킷에 헹궈 이물을 털어낸 뒤 다시 샴푸를 묻힙니다.
- 세차 후에는 깨끗한 물로 헹궈 드라잉 루프에 걸어 자연 건조하고, 필요 시 섬유유연제 없이 분리 세탁합니다.