Bilt Hamber Highbild
빌트 햄버 하이빌드 (고두께 필러 프라이머)
Highbild is a high-solids modified alkyd and zinc phosphate filler primer used to fill and level minor imperfections in automotive bodywork. The thixotropic formula resists sag on vertical panels and delivers spray-quality build from an aerosol; it suits bare metal, GRP and fully cured paint.
하이빌드는 자동차 차체의 미세한 결함을 메우고 평탄화하는 고고형분 개질 알키드와 아연 인산염 기반 필러 프라이머입니다. 요변성 처방으로 수직면에서도 흘러내림이 적고 에어로졸에서도 스프레이 도장 수준의 빌드업을 제공하며, 베어메탈·GRP·완전 경화 도장면에 적합합니다.
- Brand
- Bilt Hamber
- Categories
- Exterior : Polishes
Key features
- Modified alkyd and zinc phosphate filler primer
- Good build and fill on bodywork imperfections
- Thixotropic, anti-sag for vertical panels
- Adjustable fan spray nozzle
- Typical dry film about 25 to 50 microns
- Works on bare metal, GRP and cured paint
- Touch dry around 30 minutes; firm at about 60; overcoat after about 90
Usage
- Degrease bare steel with a solvent and flat existing coatings with about 280 to 400 grit paper, then degrease again with panel wipe.
- Shake the aerosol thoroughly before use.
- Spray even coats from roughly 25 cm distance.
- Use the indicative drying guide of about 30 minutes touch dry, 60 minutes firm and 90 minutes before overcoating.
- Sand flat as required and apply a suitable single-pack or two-pack topcoat.
핵심 특징
- 개질 알키드·아연 인산염 필러 프라이머
- 차체 결함 메움과 빌드업에 우수
- 수직면용 요변성·논 새그 처방
- 조절식 팬 분사 노즐
- 건조 도막 두께 약 25~50 마이크론
- 베어메탈·GRP·경화 도장면 호환
- 약 30분 지촉, 60분 경화, 90분 후 상도 가능
사용법
- 베어 메탈은 용제로 충분히 탈지하고 기존 도막은 약 280~400방으로 연마한 뒤 패널 와이프로 다시 탈지합니다.
- 사용 전 에어로졸을 충분히 흔들어 줍니다.
- 약 25cm 거리를 유지하며 균일하게 분사 도포합니다.
- 건조 가이드: 약 30분 지촉, 60분 경화, 90분 후 상도 가능 기준으로 진행합니다.
- 필요 시 샌딩한 후 1액형 또는 2액형 상도로 마감합니다.