MAUI
마우이
파이어볼 · fire · Fireball MAUI · 파이어볼 마우이
MAUI is a hybrid ceramic spray coating with an extended buffing window, making application more relaxed and forgiving than competing products in the lineup. It delivers gloss and water repellency on par with STELLA and POSEIDON while trading a slight reduction in slickness and durability for maximum workability. Advanced Superlink technology gives MAUI strong resistance against both hard and soft water.
MAUI는 긴 버핑 가능 시간 덕분에 동급 제품보다 여유롭고 편안하게 시공할 수 있는 하이브리드 세라믹 스프레이 코팅입니다. STELLA 및 POSEIDON에 준하는 광택과 발수성을 제공하며, 슬릭함과 내구성을 약간 희생하는 대신 뛰어난 작업 편의성을 갖췄습니다. 첨단 Superlink 기술로 경수와 연수 모두에 강한 발수력을 발휘합니다.
- Brand
- Fireball
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- Extended buffing window for easier application
- Hybrid ceramic spray coating formula
- High gloss and water repellency comparable to STELLA and POSEIDON
- Advanced Superlink technology
- Strong resistance against hard and soft water
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Review the installation video via QR code to determine the optimal buffing time for your temperature and humidity conditions.
- Shake the bottle vigorously upside-down before use to mix the product thoroughly.
- Method A: Spray onto a microfiber towel until damp, then spread across the panel in one-directional strokes without overlapping.
- Method B: Spray onto the Fireball White applicator 5 times to load it, then spread in one-directional strokes without overlapping.
- Once water droplets form, wait 4 to 5 minutes, then buff off with a clean microfiber towel.
- Work on the bonnet in half sections for best results.
- Allow one full week to cure; avoid washing the vehicle for at least 24 hours after application.
핵심 특징
- 넓은 버핑 시간으로 편리한 시공
- 하이브리드 세라믹 스프레이 코팅 포뮬라
- STELLA·POSEIDON에 준하는 광택과 발수성
- 첨단 Superlink 기술 적용
- 경수·연수에 대한 강한 저항력
사용법
- QR코드 영상을 확인하여 현재 온도와 습도에 맞는 최적의 버핑 시간을 파악합니다.
- 사용 전 병을 거꾸로 들고 세게 흔들어 제품을 충분히 혼합합니다.
- 방법 A: 마이크로파이버 타월이 촉촉해질 때까지 스프레이한 후, 패널 위를 겹치지 않게 한 방향으로 도포합니다.
- 방법 B: Fireball White 어플리케이터에 5회 스프레이하여 충분히 적신 후, 겹치지 않게 한 방향으로 도포합니다.
- 물방울이 맺히면 4~5분 기다렸다가 깨끗한 마이크로파이버 타월로 닦아냅니다.
- 보닛은 절반씩 나누어 작업하면 더 좋은 결과를 얻을 수 있습니다.
- 완전한 경화를 위해 1주일을 기다리며, 시공 후 최소 24시간 동안은 세차하지 않습니다.