Find Your Detail · 제품 카탈로그 · 브랜드 · 실사용 영상 · 소개

NANOSKIN 슈퍼차저 희석비 & 사용 가이드

NANOSKIN 슈퍼차저 희석비 pH 스펙 카드

SUPER-CHARGER

SUPER-CHARGER는 물 활성화 방식의 SiO2 스프레이 실런트로, 세차 후 젖은 표면에 분사하고 강한 물줄기로 즉시 헹궈내는 무접촉 시공이 가능합니다. 물과 반응해 표면을 친수성에서 소수성으로 전환하며 자외선 차단과 발수 성능을 부여하고, 별도의 버핑이 필요 없습니다. 16oz는 희석 없이 바로 사용하고, 갤런 이상 대용량은 100:1 농축액으로 제공됩니다.

브랜드
NANOSKIN
카테고리
Exterior : Coating
기본 희석 비율
RTU ~ 1:100
pH
neutral (7)
최종 업데이트
2026-09-07

작용 방식

  • 실리콘 피막(광택·발수) — 광택과 발수를 주지만, 도장 작업 전에는 제거가 필요합니다.

공개 성분

성분CAS역할
Water7732-18-5희석제
Polydimethylsiloxane63148-62-9피막 형성제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 물 활성화 분사 후 헹굼 타입 실런트 — 버핑·광택 작업 불필요
  • SiO2 성분이 표면을 친수성에서 소수성으로 전환
  • 물방울 맺힘과 자외선 차단 성능
  • 무접촉 시공으로 도장면 흠집 위험 감소
  • 도장·유리·휠·소프트탑·휠하우스·트림에 적용 가능
  • 100:1 농축(갤런 이상) 또는 희석 없이 사용하는 16oz 선택

희석 비율

용도희석비율
Exterior : Coating (기본)RTU ~ 1:1001:0-100

사용법

  1. 직사광선을 피해 차량을 깨끗이 세차하고 표면이 충분히 식었는지 확인합니다.
  2. 표면이 젖어 있고 식은 상태에서 구역별로 SUPER-CHARGER를 가볍게 분사합니다.
  3. 해당 구역을 즉시 강한 물줄기로 헹궈냅니다.
  4. 물방울 맺힘 효과가 바로 나타납니다. 타월로 인한 미세 스크래치를 피하기 위해 깨끗한 타월이나 에어 블로어로 건조합니다.
  5. 제품이 마르며 물자국이나 얼룩이 생긴 경우 차량 전체를 다시 충분히 헹군 뒤 건조합니다.

SUPER-CHARGER is a water-activated SiO2 spray sealant built for touchless, rinse-off application — spray it onto a wet surface after washing and rinse immediately with a strong jet of water. The chemistry reacts with water to shift the surface from hydrophilic to hydrophobic, adding UV protection and water-repellent behavior without hand buffing. It is available ready-to-use in 16 oz or as a 100:1 concentrate in gallon and larger sizes.

Key features

  • Water-activated spray-on, rinse-off sealant — no rubbing or buffing
  • SiO2 chemistry shifts the surface from hydrophilic to hydrophobic
  • Water beading and UV protection
  • Touchless application reduces handling-induced paint marring
  • Compatible with paint, glass, rims, convertible tops, wheel wells and trim
  • 100:1 concentrate (gallon+) or ready-to-use 16 oz

Usage

  1. Wash the car outside of direct sunlight and make sure the surface is cool to the touch.
  2. While the surface is still wet and cool, work section by section and lightly mist SUPER-CHARGER directly onto the surface.
  3. Immediately rinse the section with a strong jet of water.
  4. Water beading will take effect right away; dry with a clean towel or air blower to avoid towel-induced swirl marks.
  5. If the product dries and leaves water spots or streaks, rinse the car thoroughly again and dry.

다른 이름: 나노스킨, NANOSKIN SUPER-CHARGER, NS SUPER-CHARGER, SC, NANOSKIN SC, NS SC, 나노스킨 슈퍼차저, 나노스킨 SC, UL-SCR

View in English

출처

  • NANOSKIN 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

NANOSKIN의 다른 제품

  • HAPPY BUG
  • FIRST CUT
  • HYPER SUDS
  • REVIVAL
  • BANANA ICE
  • General Purpose Cleaning Solvent

같은 카테고리(Coating) 제품

  • Ganbass G-gross
  • Supernatural Acrylic Spritz
  • PROVIDE Straight
  • Ganbass Pash
  • Menzerna Ceramic Spray Sealant
  • Chemical Guys HydroSlick Ceramic Coating HyperWax

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)