SUPER-CHARGER
슈퍼차저
SUPER-CHARGER is a water-activated SiO2 spray sealant designed for touchless, rinse-off application — spray onto a wet surface after washing and immediately rinse with a strong jet of water. The chemistry reacts with water to convert the surface from hydrophilic to hydrophobic, delivering UV protection and water-repellent properties without hand buffing. Available as RTU (16 oz) or as a 100:1 concentrate for gallon and larger sizes.
SUPER-CHARGER는 물 활성화 방식의 SiO2 스프레이 실런트로, 세차 후 젖은 표면에 분사하고 강한 물줄기로 즉시 헹궈내는 무접촉 시공이 가능합니다. 물과의 화학 반응으로 표면을 친수성에서 소수성으로 전환하여 자외선 차단 및 발수 성능을 부여하며, 별도의 버핑 작업이 필요 없습니다. 16oz는 희석 없이 바로 사용하는 제품이며, 갤런 이상 대용량은 100:1 농축액으로 제공됩니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Coating
- Primary dilution
- 1:100
Key features
- Water-activated spray-on, rinse-off sealant — no rubbing or buffing
- SiO2 chemistry converts surface from hydrophilic to hydrophobic
- Superior water beading and UV protection
- Touchless application eliminates risk of paint imperfections
- Applicable on paint, glass, rims, convertible tops, wheel wells, and trim
- 100X concentrated formula (gallon+) or RTU (16 oz)
Dilution
- Exterior : Coating — 1:100 (1:100) (primary)
Usage
- Thoroughly wash the car outside of direct sunlight and ensure the surface is cool to the touch.
- While the surface is still wet and cool, work section by section and lightly mist SUPER-CHARGER directly onto the surface.
- Immediately rinse the section with a strong jet of water.
- Water beading will take effect immediately. Dry the surface with a clean towel or air blower to avoid potential towel-induced swirl marks.
- If product dries and causes water spots or streaking, rinse the car thoroughly again and dry.
핵심 특징
- 물 활성화 방식의 분사 후 헹굼 타입 실런트 — 버핑·광택 불필요
- SiO2 성분이 표면을 친수성에서 소수성으로 전환
- 우수한 물방울 맺힘 효과 및 자외선 차단
- 무접촉 시공으로 도장면 흠집 위험 최소화
- 도장, 유리, 휠, 소프트탑, 휠 하우스, 트림에 적용 가능
- 100배 농축 (갤런 이상) 또는 희석 없이 바로 사용 (16oz) 선택 가능
사용법
- 직사광선을 피해 차량을 깨끗이 세차하고, 표면이 충분히 식었는지 확인합니다.
- 표면이 젖어 있고 식은 상태에서 구역별로 SUPER-CHARGER를 가볍게 분무합니다.
- 즉시 강한 물줄기로 해당 구역을 헹궈냅니다.
- 물방울 맺힘 효과가 즉시 나타납니다. 타월로 인한 미세 스크래치를 방지하기 위해 깨끗한 타월이나 에어 블로어로 건조합니다.
- 제품이 건조되어 물자국이나 얼룩이 생긴 경우 차량 전체를 다시 충분히 헹군 후 건조합니다.