나노 세라믹
NANO CERAMIC
NANOSKIN · NANOSKIN NANO CERAMIC · NS NANO CERAMIC · NC · NANOSKIN NC · NS NC · 나노스킨 나노 세라믹
나노 세라믹은 초미세 연마 입자와 세라믹 보호막을 결합한 원스텝 세라믹 합성 실런트입니다. DA 또는 로터리 폴리셔로 시공해 산화, 스월 마크, 세차 흠집 같은 가벼운 결함을 제거하는 동시에 UV, 수액, 곤충, 산화로부터 약 1년간 도장을 보호하는 세라믹 층을 형성합니다.
- 브랜드
- 나노스킨
- 카테고리
- Exterior : Polishes, Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 폴리싱과 보호를 한 번에 마치는 원스텝 시공
- 초미세 연마 입자로 산화, 스월 마크, 세차 흠집 정리
- 세라믹 막이 UV, 수액, 산화, 곤충 오염으로부터 도장 보호
- 도장 수명 약 40~50% 연장 목표
- 오염 누적 약 70~80% 감소 목표
- 1회 시공으로 약 1년 지속
희석 비율
- Exterior : Polishes — RTU (1:0) (기본)
사용법
- 사용 전 나노 세라믹을 충분히 흔들어 줍니다.
- DA 또는 로터리 폴리셔의 가벼운 폴리싱·왁싱 패드에 완두콩 크기 3점을 떨어뜨리고 한 번에 약 0.2~0.3㎡씩 작업합니다.
- 중간 압력으로 폴리싱한 뒤 압력을 줄여 폴리싱 작용을 마무리합니다.
- 제품을 표면에 그대로 두고 최소 30~60분간 경화시킵니다.
- 경화가 끝나면 깨끗한 건조 마이크로파이버 타월로 잔여물과 피막을 닦아내 표면에 남은 제품이 없도록 합니다.
NANO CERAMIC is a one-step ceramic synthetic sealant that pairs ultra-fine abrasives with a ceramic protective film. Applied with a DA or rotary polisher, it removes light defects such as oxidation, swirl marks and wash marring while laying down a ceramic layer that shields paint from UV, tree sap, insects and oxidation for around one year.
Key features
- One-step polish and seal in a single application
- Ultra-fine abrasives address oxidation, swirl marks and wash marring
- Ceramic layer shields paint from UV, tree sap, oxidation and insects
- Aims to extend paint life around 40 to 50 percent
- Aims to reduce dirt accumulation around 70 to 80 percent
- Up to about one year of protection per application
Usage
- Shake NANO CERAMIC well before use.
- Place three pea-sized dots on a light polishing or waxing pad on a DA or rotary polisher and work 2 to 3 sq ft at a time.
- Polish the section with medium pressure, then ease off to let the polishing action finish.
- Leave the product on the surface and let it cure for at least 30 to 60 minutes.
- After curing, wipe off any residue or film with a clean dry microfiber towel until the surface is fully clear.