EWOCAR 그래핀60 사용 가이드

EWOCAR 그래핀60 희석비 pH 스펙 카드

Graphene60

Graphene60는 SiO₂ 기술과 그래핀을 결합한 차세대 세라믹 코팅으로, 도장면 위에 초고경도의 화학 결합 보호막을 형성합니다. 뛰어난 스크래치 저항성, 지속적인 발수 효과, 깊은 광택을 제공하며 전문 디테일러 전용 제품입니다.

브랜드
EWOCAR
카테고리
Exterior : Coating
최종 업데이트
2026-06-02

핵심 특징

사용법

  1. 도장면의 결함을 제거하기 위해 연마 작업을 한 후, 이워카 디그리저와 마이크로파이버 타월로 완전히 탈지합니다.
  2. 어플리케이터 패드에 코팅제를 고르게 적신 뒤, 핑거 어플리케이터를 사용해 소면적(최대 보닛 절반)씩 도포합니다.
  3. 코팅제를 1~3분간 플래시(경화)시키며, 정확한 시간은 온도와 습도에 따라 달라집니다.
  4. 오렌지 초극세사 천으로 잉여 코팅을 닦아낸 후, 이워카 블루 천으로 표면을 부드럽게 버핑하여 최종 광택을 냅니다.
  5. 30~60분 후 하이스팟이 발견되면 디그리저를 사용하거나 해당 부위를 재연마하여 수정합니다.

Graphene60 is a next-generation ceramic coating that blends SiO₂ technology with graphene to form an ultra-hard, chemically bonded protective layer over painted surfaces. It delivers outstanding scratch resistance, lasting hydrophobicity, and a rich wet-look gloss — recommended exclusively for professional detailers.

Key features

  • Graphene-reinforced ultra-hard scratch-resistant barrier
  • Blocks micro-marring, oxidation, road salt, and insect acids
  • Long-lasting hydrophobicity and self-cleaning surface
  • Deep, wet-look gloss finish
  • Superior thermal resistance via graphene infusion
  • Professional-use only formulation

Usage

  1. Polish the paint surface to remove imperfections, then degrease thoroughly using Ewocar Degreaser and a microfiber towel.
  2. Prime the applicator pad evenly, then apply the coating to a small area (maximum half a hood panel) using the finger applicator.
  3. Allow the coating to flash for 1–3 minutes; exact timing depends on ambient temperature and humidity.
  4. Wipe off excess coating with an Orange Ultrasoft Microfiber cloth, then buff to final gloss with a blue Ewocar cloth.
  5. If high spots appear after 30–60 minutes, correct them with Degreaser or by re-polishing the affected area.

다른 이름: 이우카, EWO, 이우, Ewocar Graphene60, 이워카 그래핀60

View in English

출처

관련 제품

EWOCAR의 다른 제품

같은 카테고리(Coating) 제품

더 보기