V2 Ceramic Spray Sealant
V2 세라믹 스프레이 실런트
A microemulsion water-based ceramic spray sealant that delivers months of hydrophobic protection, enhanced gloss, and UV resistance. It bonds to paint, glass, and plastics, functioning equally well as a standalone protectant or as a maintenance layer over existing coatings. PFAS-free and safe for matte finishes, PPF, and vinyl wraps.
마이크로에멀전 수성 기반의 세라믹 스프레이 실런트로, 수개월간의 발수 보호, 광택 향상, 자외선 차단 효과를 제공합니다. 도장면, 유리, 플라스틱에 결합하며 단독 보호제 또는 기존 코팅의 유지 보수 레이어로 모두 사용 가능합니다. PFAS 미함유 제품으로 무광 마감, PPF, 랩 필름에도 안전합니다.
- Brand
- CLEAN.
- Categories
- Exterior : Coating
- pH
- acid (4)
Key features
- Microemulsion water-based ceramic formula
- Up to 12 months of hydrophobic protection
- UV and chemical resistance
- PFAS-free formulation
- Safe for matte, PPF, vinyl wraps, and all exterior surfaces
- Usable on wet, dry, or rinse-off applications
- 10-minute cure before driving
Usage
- Dry application: Ensure the surface is clean, cool, and dry. Decontaminate and polish if needed.
- Dry application: Spray a light mist onto the surface or a microfiber towel, spread evenly, then buff to a streak-free finish with a second clean dry towel. Work one panel at a time. Allow 10 minutes of curing before driving.
- Drying aid (wet surface): After washing and rinsing, lightly mist the product over each wet panel, then immediately dry each panel with a microfiber drying towel. Work one panel at a time. Wash towels after use.
- Spray-on, rinse-off (wet surface): After washing and rinsing, mist the product over each wet panel and immediately rinse off with a strong stream of water. Rinse from bottom to top, then top to bottom. Work one panel at a time, then dry the vehicle.
핵심 특징
- 마이크로에멀전 수성 세라믹 포뮬러
- 최대 12개월 발수 보호
- 자외선 및 화학물질 저항성
- PFAS 미함유
- 무광, PPF, 랩 필름 및 모든 외장 표면에 안전
- 젖은 면, 건조 면, 헹굼 후 적용 모두 가능
- 운전 전 10분 경화 필요
사용법
- 건식 도포: 표면이 깨끗하고 서늘하며 건조한 상태인지 확인합니다. 필요 시 오염 제거 및 광택 작업을 진행합니다.
- 건식 도포: 제품을 표면이나 마이크로파이버 타월에 가볍게 분사하고 고르게 펴 바른 후, 깨끗하고 건조한 두 번째 타월로 줄무늬 없이 버프질합니다. 한 패널씩 작업합니다. 운전 전 10분간 경화 시간을 줍니다.
- 드라이 에이드 (젖은 표면): 세차 및 헹굼 후 각 젖은 패널에 제품을 가볍게 분사하고, 마이크로파이버 건조 타월로 즉시 건조합니다. 한 패널씩 작업하며 사용 후 타월은 세탁합니다.
- 스프레이 후 헹굼 (젖은 표면): 세차 및 헹굼 후 각 젖은 패널에 제품을 분사하고 즉시 강한 물줄기로 헹궈냅니다. 아래에서 위로 헹군 후 위에서 아래로 마무리합니다. 한 패널씩 작업하고 완료 후 차량을 건조합니다.