V2 세라믹 스프레이 실런트
V2 Ceramic Spray Sealant
CLEAN. · 클린 · 크린 · CLEAN. V2 Ceramic Spray Sealant · V2CSS · CLEAN. V2CSS · 클린 V2 세라믹 스프레이 실런트
수성 마이크로에멀전 기반의 세라믹 스프레이 실런트로, 수개월간의 발수 보호와 광택, 자외선 차단을 더해 줍니다. 도장면, 유리, 플라스틱에 결합하며 단독 보호제로도, 기존 코팅 위 유지 보수 레이어로도 사용할 수 있습니다. PFAS가 들어 있지 않고 무광, PPF, 랩 필름에도 안전합니다.
- 브랜드
- 클린.
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
- pH
- acid (4)
핵심 특징
- 수성 마이크로에멀전 세라믹 포뮬러
- 약 12개월까지 발수 보호
- 자외선 및 화학물질 저항성
- PFAS 무함유
- 무광, PPF, 랩 등 외장 표면 안전
- 젖은 면, 건조 면, 헹굼 후 적용 모두 가능
- 운전 전 약 10분 경화 필요
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 건식 도포: 표면이 깨끗하고 서늘하며 건조한지 확인하고, 필요 시 오염 제거와 광택 작업을 마칩니다.
- 건식 도포: 표면이나 극세사 타월에 가볍게 분사해 고르게 펴 바른 뒤, 깨끗하고 건조한 두 번째 타월로 패널 단위로 줄무늬 없이 버프합니다. 운전 전 약 10분 경화 시간을 줍니다.
- 드라잉 에이드(젖은 면): 세차와 헹굼 후 각 젖은 패널에 가볍게 분사하고 극세사 건조 타월로 패널 단위로 즉시 건조합니다.
- 스프레이 후 헹굼(젖은 면): 세차·헹굼 후 각 젖은 패널에 분사하고 강한 물줄기로 아래에서 위, 위에서 아래 순으로 즉시 헹군 뒤 패널 단위로 작업하고 차량을 건조합니다.
A water-based microemulsion ceramic spray sealant that adds months of hydrophobic protection, gloss, and UV resistance. Bonds to paint, glass, and plastics and works either as a standalone protectant or as a maintenance topper over existing coatings. PFAS-free and safe on matte, PPF, and vinyl.
Key features
- Water-based microemulsion ceramic formula
- Up to about 12 months of hydrophobic protection
- UV and chemical resistance
- PFAS-free
- Safe on matte, PPF, vinyl, and exterior surfaces
- Apply on wet, dry, or rinse-off
- About 10-minute cure before driving
Usage
- Dry application: confirm the surface is clean, cool, and dry. Decontaminate and polish if needed.
- Dry application: lightly mist onto the surface or a microfiber towel, spread evenly, then buff streak-free with a clean dry towel, panel by panel. Allow about 10 minutes before driving.
- Drying aid on wet surface: after washing and rinsing, mist over each wet panel and immediately dry with a microfiber drying towel, panel by panel.
- Spray-on, rinse-off on wet surface: after washing and rinsing, mist over each wet panel and rinse off immediately with a strong stream of water, bottom to top then top to bottom, panel by panel, then dry the vehicle.