Water Spot Remover
워터 스팟 리무버
A ready-to-use spray that dissolves stubborn water spots and mineral stains from painted surfaces, glass, and plastics. Effective on both wet and dry surfaces, though dry surface application yields best results. If deep etching has occurred, paint correction may be required.
도장면, 유리, 플라스틱의 완고한 워터 스팟과 미네랄 얼룩을 녹여 제거하는 즉시 사용 스프레이입니다. 젖은 면과 건조한 면 모두 사용 가능하나 건조한 상태에서 최적의 효과를 발휘합니다. 깊은 에칭이 발생한 경우 도장 보정이 필요할 수 있습니다.
- Brand
- CLEAN.
- Categories
- Exterior : Remover
- pH
- acid (3)
Key features
- Dissolves water spots and mineral stains
- Works on painted surfaces, glass, and plastics
- Effective on wet and dry surfaces
- Best results on dry surfaces
- Ready to use — no dilution required
Usage
- Clean the vehicle before application.
- Shake well, then spray onto a microfiber towel and wipe the affected area one panel at a time.
- Allow the product to dwell for 1–2 minutes; do not let it dry and avoid direct sunlight.
- Gently rub with a microfiber towel to enhance penetration.
- Rinse thoroughly with water and repeat if stubborn spots remain.
- Wash the car afterwards to neutralize any residue.
- On glass and plastics, test on an inconspicuous area first.
핵심 특징
- 워터 스팟 및 미네랄 얼룩 용해 제거
- 도장면, 유리, 플라스틱에 사용 가능
- 젖은 면과 건조한 면 모두 효과적
- 건조한 표면에서 최적의 결과
- 희석 불필요한 즉시 사용 제품
사용법
- 도포 전 차량을 세정합니다.
- 충분히 흔든 후 마이크로파이버 타올에 분사하고 한 번에 한 패널씩 해당 부위를 닦습니다.
- 제품이 1~2분간 작용하도록 두되 건조되지 않게 하고 직사광선을 피합니다.
- 마이크로파이버 타올로 부드럽게 문질러 침투를 촉진합니다.
- 물로 충분히 헹구고 완고한 워터 스팟이 남아 있으면 반복합니다.
- 잔여물 중화를 위해 이후 차량을 세차합니다.
- 유리 및 플라스틱에는 눈에 띄지 않는 부위에 먼저 테스트합니다.