Bilt Hamber Deox-Gel Dilution Ratios & User Guide

Bilt Hamber Bilt Hamber Deox-Gel dilution ratio and pH specification chart

빌트 햄버 디옥스-젤

Bilt Hamber Deox-Gel — Exterior : Remover, acid pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/bilt-hamber/deox-gel

Bilt Hamber 빌트 햄버 디옥스-젤 — Exterior : Remover, pH acid. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/bilt-hamber/deox-gel

Deox-Gel is a viscous, thixotropic rust remover for surfaces or objects too large to immerse in a Deox-C bath. The non-toxic, biodegradable gel clings to vertical surfaces and produces a clean, bare-metal finish without distorting delicate steelwork, and it is harmless to glass, plastics, aluminium and chrome.

디옥스-젤은 디옥스-C 용액에 담그기 어려운 큰 표면이나 물체의 부식 제거를 위해 만들어진 점성이 높은 요변성 녹 제거제입니다. 무독성·생분해성 젤이 수직면에도 잘 들러붙어 정밀한 강재를 변형시키지 않고 깨끗한 베어메탈 마감을 만들어 주며, 유리·플라스틱·알루미늄·크롬에는 영향이 없습니다.

Brand
Bilt Hamber
Categories
Exterior : Remover
Primary dilution
RTU
pH
acid (4)
Where to buy
Search on Amazon (US)
Last updated
2026-08-16

Key features

  • Viscous thixotropic gel clings to vertical surfaces
  • Non-toxic and biodegradable
  • Produces clean bare-metal finish
  • Will not distort delicate steel
  • Harmless to glass, plastics, aluminium and chrome
  • Low-attention working time
  • Heavy corrosion typically handled in about two applications

Dilution

UseDilutionRatio
Exterior : Remover (primary)RTU1:0

Usage

  1. Wire-brush or sand off loose rust, then degrease with mineral spirits, wash with hot soapy water and dry fully.
  2. Apply Deox-Gel neat in a thick, even coat (up to about 4mm, thicker for heavier rust) with a brush, spatula or trowel.
  3. Leave for about 30-120 minutes for light rust, or about 12-48 hours for heavy corrosion, covering the coating with cling-film to keep it from drying.
  4. Once the rust has dissolved into the gel, scrub the surface with a stiff plastic-bristle brush and rinse thoroughly with clean water.
  5. Dry the metal completely with paper towels, compressed air or a hot-air gun, then paint or apply Atom-Mac immediately to prevent flash rust.

핵심 특징

  • 점성 있는 요변성 겔이 수직면에 잘 부착
  • 무독성·생분해성
  • 깨끗한 베어메탈 마감
  • 정밀 강재를 변형시키지 않음
  • 유리·플라스틱·알루미늄·크롬에 영향 없음
  • 지속 관리 거의 불필요
  • 심한 부식은 일반적으로 약 2회 도포로 처리

사용법

  1. 느슨한 녹은 와이어 브러시·샌드로 제거한 뒤 미네랄 스피릿으로 탈지하고 뜨거운 비눗물로 세척해 완전히 건조시킵니다.
  2. 디옥스-젤을 붓·스패츌러·트로웰로 원액 그대로 두툼하고 균일하게 도포합니다(녹이 심할수록 두껍게, 최대 약 4mm).
  3. 가벼운 녹은 약 30~120분, 심한 녹은 약 12~48시간 두며, 장시간 작업 시 랩으로 덮어 건조를 방지합니다.
  4. 녹이 젤에 용해되면 단단한 플라스틱 브러시로 문질러 닦고 맑은 물로 충분히 헹굽니다.
  5. 종이타월·압축공기·핫에어건으로 완전히 건조한 뒤, 즉시 도장하거나 아톰맥을 도포해 플래시 러스트를 방지합니다.

Also known as: 빌트햄버, 빌트, 빌트함버, bilt, Deox-Gel, DeoxGel, Deox Gel Rust Remover, BH Deox-Gel, 디옥스 젤, 빌트햄버 디옥스-젤, 녹 제거 젤, 러스트 리무버 젤

한국어로 보기

Sources

  • Bilt Hamber official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from Bilt Hamber

  • Auto-Wheel
  • 25Ltr Dispensing Tap
  • Air-Con Bomb Citrus 175ml
  • Dynax-Seam
  • Bilt Hamber Large Microfibre Buffing Cloth
  • Bilt Hamber Deox-C

More Remover products

  • CarCandy BoatCandy Hull Cleaner
  • Vonixx Strike
  • PAICAR Glue Remover
  • CarCandy Crush-It Concrete Remover
  • OPTI-COAT Opti-Coat MDR Mineral Deposit Remover
  • CARLAB Iron Fall-Out

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)