Infinity Wax 헤비 컷 컴파운드 400 희석비 & 사용 가이드

Infinity Wax 헤비 컷 컴파운드 400 희석비 pH 스펙 카드

Heavy Cut Compound 400

멘저나 헤비 컷 컴파운드 400은 초미세 연마 입자로 1200방 샌딩 자국을 빠르게 제거하면서 연마력에 걸맞은 탁월한 광택을 실현합니다. 실리콘·필러 미함유로 결과가 반영구적이며, 모든 클리어 코트에 적합합니다. 듀얼액션·회전식 폴리셔 또는 손 작업으로 사용 가능합니다.

브랜드
Infinity Wax
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 시작 전 표면이 깨끗하고 건조하며 서늘한지 확인하세요.
  2. 중간~강한 폴리싱 패드 또는 람스울 패드에 완두콩 크기로 2~3방울 도포하세요.
  3. 패드를 도장면에 밀착시키고 저속으로 제품을 고르게 펴 바르세요.
  4. 중속으로 연마 작업을 진행하세요 (DA는 3~4단, 회전식은 2~3단).
  5. 부드러운 마이크로파이버 타올로 잔여물을 닦아내세요.
  6. 패널 와이프로 마감을 확인하여 잔여물이 완전히 제거되었는지 점검하세요.

Menzerna Heavy Cut Compound 400 uses ultra-fine abrasives to rapidly remove sanding marks up to 1200 grit while delivering an exceptional level of gloss that matches its cutting power. It is silicone-free and filler-free, ensuring all results are permanent. The compound performs on all types of clear coat and works effectively with dual-action or rotary polishers as well as by hand.

Key features

  • Removes sanding marks up to 1200 grit
  • High gloss output matching cut level
  • Silicone-free and filler-free formula
  • Suitable for all types of clear coat
  • Diminishing abrasive particles
  • Compatible with DA, rotary, or hand application
  • Cut 8/10, Gloss 8/10

Usage

  1. Ensure the surface is clean, dry, and cool to the touch before starting.
  2. Apply 2-3 pea-sized amounts of compound to a medium or heavy polishing pad, or a lambswool pad.
  3. Place the pad against the paintwork and work at low speed to spread the product evenly.
  4. Increase to medium speed and work the abrasives (speed 3-4 on a DA, speed 2-3 on a rotary).
  5. Remove residue with a soft microfibre towel.
  6. Check the finish using a panel wipe to confirm all residue has been cleared.

다른 이름: 인피니티, 인피니티 왁스, infinity, Menzerna Heavy Cut Compound 400, HCC400, 멘저나 헤비 컷 컴파운드 400

View in English

출처

관련 제품

Infinity Wax의 다른 제품

같은 카테고리(Polishes) 제품

더 보기