Infinity Wax Heavy Cut Compound 400 Dilution Ratios & User Guide

Infinity Wax Heavy Cut Compound 400 dilution ratio and pH specification chart

헤비 컷 컴파운드 400

Infinity Wax Heavy Cut Compound 400 — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/infinity-wax/heavy-cut-compound-400

Infinity Wax 헤비 컷 컴파운드 400 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/infinity-wax/heavy-cut-compound-400

Menzerna Heavy Cut Compound 400 uses ultra-fine abrasives to rapidly remove sanding marks up to 1200 grit while delivering an exceptional level of gloss that matches its cutting power. It is silicone-free and filler-free, ensuring all results are permanent. The compound performs on all types of clear coat and works effectively with dual-action or rotary polishers as well as by hand.

멘저나 헤비 컷 컴파운드 400은 초미세 연마 입자로 1200방 샌딩 자국을 빠르게 제거하면서 연마력에 걸맞은 탁월한 광택을 실현합니다. 실리콘·필러 미함유로 결과가 반영구적이며, 모든 클리어 코트에 적합합니다. 듀얼액션·회전식 폴리셔 또는 손 작업으로 사용 가능합니다.

Brand
Infinity Wax
Categories
Exterior : Polishes
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Polishes (primary)RTU1:0

Usage

  1. Ensure the surface is clean, dry, and cool to the touch before starting.
  2. Apply 2-3 pea-sized amounts of compound to a medium or heavy polishing pad, or a lambswool pad.
  3. Place the pad against the paintwork and work at low speed to spread the product evenly.
  4. Increase to medium speed and work the abrasives (speed 3-4 on a DA, speed 2-3 on a rotary).
  5. Remove residue with a soft microfibre towel.
  6. Check the finish using a panel wipe to confirm all residue has been cleared.

핵심 특징

  • 1200방 샌딩 자국 제거
  • 연마력에 맞는 높은 광택 결과
  • 실리콘·필러 미함유
  • 모든 클리어 코트 적합
  • 감소형 연마 입자
  • DA·회전식 폴리셔 및 손 작업 가능
  • 연마력 8/10, 광택 8/10

사용법

  1. 시작 전 표면이 깨끗하고 건조하며 서늘한지 확인하세요.
  2. 중간~강한 폴리싱 패드 또는 람스울 패드에 완두콩 크기로 2~3방울 도포하세요.
  3. 패드를 도장면에 밀착시키고 저속으로 제품을 고르게 펴 바르세요.
  4. 중속으로 연마 작업을 진행하세요 (DA는 3~4단, 회전식은 2~3단).
  5. 부드러운 마이크로파이버 타올로 잔여물을 닦아내세요.
  6. 패널 와이프로 마감을 확인하여 잔여물이 완전히 제거되었는지 점검하세요.

Also known as: 인피니티, 인피니티 왁스, infinity, Menzerna Heavy Cut Compound 400, HCC400, 멘저나 헤비 컷 컴파운드 400

한국어로 보기

Sources

Related products

More from Infinity Wax

More Polishes products

Explore more