servFaces 울트라 파인 컷 희석비 & 사용 가이드

servFaces 울트라 파인 컷 희석비 pH 스펙 카드

Ultra Fine Cut

울트라 파인 컷은 실리콘이 없는 마이크로 연마 컴파운드로, P6000 그릿 이상의 모든 도장 시스템에서 미세 스크래치, 연마 자국, 홀로그램, 샌딩 흔적을 제거합니다. 연마 입자가 충전 효과 없이 어둡고 민감한 색상에서도 오래가는 고광택 마감을 냅니다.

브랜드
servFaces
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 사용 전 건조하거나 새 폴리싱 패드에 울트라 파인 컷을 충분히 적십니다.
  2. 기계를 끈 상태에서 작업할 면에 제품을 고르게 폅니다.
  3. 투명한 막이 생겨 연마 입자가 분해될 때까지 적당한 압력으로 교차 방향 작업합니다.
  4. 버핑 타월이나 올라운드 타월 같은 마이크로파이버 천으로 잔여물을 닦아냅니다.

Ultra Fine Cut is a silicone-free micro polishing compound that removes very fine scratches, polishing smears, holograms, and sanding marks from P6000 grit upward on all paint systems. Its abrasive particles produce a durable high-gloss finish on dark and sensitive paints with no filling effect.

Key features

  • Silicone-free micro polishing compound
  • Removes fine scratches, holograms, and sanding from P6000 grit
  • Works on scratch-resistant clear coats
  • High-gloss finish with no filling effect
  • Safe on dark and sensitive paint shades
  • Leaves no residue and goes a long way

Usage

  1. Fully wet dry or new polishing pads with Ultra Fine Cut before use.
  2. With the machine off, spread the polish evenly across the area to be treated.
  3. Polish crosswise with moderate pressure until a transparent film forms, showing the abrasive particles have broken down.
  4. Wipe off residue with a clean microfiber cloth such as a Buffing Towel or Allround Towel.

다른 이름: serv, 서브페이스, 서브, servFaces Ultra Fine Cut, SF Ultra Fine Cut, UFC, servFaces UFC, SF UFC, 서브페이시스 울트라 파인 컷, 서브페이시스 UFC, SF10424.1

View in English

출처

관련 제품

servFaces의 다른 제품

같은 카테고리(Polishes) 제품

더 보기