Infinity Wax PC 5000 프리 컷 희석비 & 사용 가이드

Infinity Wax PC 5000 프리 컷 희석비 pH 스펙 카드

PC 5000 Pre Cut

PC 5000 프리 컷은 심하게 열화되거나 깊이 긁힌 도장면을 복원하기 위한 순수 사전 연삭 컴파운드입니다. 균일한 고밀도 연마 입자로 P1500 이상의 깊은 스크래치와 마모 자국을 빠르고 효과적으로 제거하며, 실리콘 및 용제를 함유하지 않습니다.

브랜드
Infinity Wax
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 결함 부위, 도장면, 또는 폴리싱 패드에 PC 5000을 충분히 도포합니다.
  2. 약 1,000rpm의 저속으로 결함 부위 전체에 고르게 펴 줍니다.
  3. 속도를 약 1,800rpm으로 높이고 가벼운 압력으로 마무리 연마합니다.
  4. 불필요한 표면 손상 방지를 위해 항상 깨끗한 폴리싱 패드를 사용합니다.

PC 5000 Pre Cut is a pure pre-grinding compound for reconditioning extremely weathered or deeply scratched paintwork. Its high-volume, homogenous abrasive grain provides fast and optimum cutting to eliminate deep scratches and abrasion marks from P1500 grit size, and it is safe for all cured paints without silicone or solvents.

Key features

  • Pure pre-grinding compound for extreme paint damage
  • Removes deep scratches and abrasion marks from P1500 grit
  • Homogenous abrasive grain for fast, optimum cutting
  • Compatible with all cured paints including scratch-resistant finishes
  • Silicone-free and solvent-free
  • Recommended with blue polishing pad

Usage

  1. Apply a sufficient quantity of PC 5000 to the paint defect, surface, or polishing pad.
  2. At low speed (approximately 1,000 rpm), distribute evenly over the defect area.
  3. Increase speed to approximately 1,800 rpm and polish with light pressure to finish.
  4. Always use a clean polishing pad to prevent unnecessary surface damage.

다른 이름: 인피니티, 인피니티 왁스, infinity, Zvizzer PC 5000 Pre Cut, PC5000, PC 5000, PC5000 프리 컷, 즈비저 PC 5000 프리 컷, 즈비저 PC 5000

View in English

출처

관련 제품

Infinity Wax의 다른 제품

같은 카테고리(Polishes) 제품

더 보기