Yum Ceramic
얌 세라믹
Yum Ceramic is the YumCars flagship water-based spray sealant, powered by a blend of active ceramic resins and polymers that lay a layer of intense gloss and slickness across paint, glass, chrome, trim and alloy wheels in one application. Use it straight from the bottle as a standalone sealant or topping coat, or cut it with an equal amount of water to create a protective drying aid that goes on while the car is still wet. On a properly decontaminated and polished surface, protection can extend to around six months or more.
얌 세라믹은 얌카스의 플래그십 수성 스프레이 실런트로, 활성 세라믹 레진과 폴리머 블렌드가 도장면, 유리, 크롬, 트림, 알로이 휠에 강렬한 광택과 미끄러움을 한 번에 입혀 줍니다. 단독 실런트나 토핑 코트로 원액 사용하거나, 동량의 물에 희석해 젖은 차량에 바로 적용하는 보호 드라잉 에이드로도 활용할 수 있습니다. 철저히 탈지하고 연마한 표면에서는 약 6개월 이상의 보호 효과가 기대됩니다.
- Brand
- Yum Cars
- Categories
- Exterior : Coating
- Primary dilution
- 1:1
- pH
- neutral
Key features
- Intense gloss and slickness
- Doubles as a protective drying aid
- Blend of multiple polymers and ceramic resins
- Water-based spray sealant
- Safe on paint, glass, chrome, trim and alloy wheels
- Up to about 6 months durability on a prepared surface
- Dilutable 1:1 with water for drying-aid use
Dilution
- Exterior : Coating — 1:1 (1:1) (primary)
Usage
- Prepare the vehicle with at least chemical and mechanical decontamination; a fully polished, bare surface gives the best adhesion and longevity.
- Shake well, then spray onto the panel or applicator, spread evenly with a first towel, and buff off the residue with a second towel.
- To use as a drying aid, dilute 1:1 with water inside a spray bottle.
- After the final rinse, mist the diluted solution over the wet car panel by panel and continue drying with a dedicated drying towel.
- When layering protection, apply Yum Ceramic first, add Yum Wax at least 12 hours later, then use Yum Detailer on maintenance washes.
핵심 특징
- 강렬한 광택과 미끄러움
- 보호 드라잉 에이드로도 활용 가능
- 다수의 폴리머와 세라믹 레진 블렌드
- 수성 스프레이 실런트
- 도장면, 유리, 크롬, 트림, 알로이 휠에 안전
- 준비된 표면에서 약 6개월 내구성
- 드라잉 에이드 용도로 물과 1:1 희석 가능
사용법
- 최소한 화학적·물리적 탈지를 마친 차량에 사용하며, 연마까지 끝낸 베어 표면일수록 접착력과 내구성이 높아집니다.
- 잘 흔든 뒤 패널 또는 어플리케이터에 분사하여 첫 번째 타올로 고르게 펴 바르고 두 번째 타올로 잔여물을 닦아냅니다.
- 드라잉 에이드로 사용할 때는 스프레이 보틀 안에서 물과 1:1로 희석합니다.
- 최종 헹굼 후 희석액을 젖은 차량에 패널별로 분사하며 전용 드라잉 타올로 건조를 이어갑니다.
- 보호층을 쌓을 때는 얌 세라믹을 먼저 도포하고 최소 12시간 뒤에 얌 왁스를 올린 후, 관리 세차마다 얌 디테일러를 사용합니다.