Suave HSH-Technology
수아베 HSH 테크놀로지
serv · 서브페이스 · 서브 · servFaces Suave HSH-Technology · SF Suave HSH-Technology · Suave · 서브페이시스 수아베 HSH 테크놀로지 · SF10005.1
Suave HSH-Technology is a hybrid polymer hard coating that gives coated paint a lasting, high-gloss finish. Its molecular matrix bonds chemically to the surface as an ultra-thin, non-stick layer, raising hardness by about 40-45% and resisting oxidation, salt, acids, and insects. Applied correctly, it carries a 3-year gloss guarantee.
수아베 HSH 테크놀로지는 코팅된 도장면에 오래가는 고광택 마감을 더하는 하이브리드 폴리머 하드 코팅입니다. 분자 매트릭스가 매우 얇은 비점착 막으로 표면에 화학 결합하여 경도를 약 40~45% 높이고 산화, 염분, 산성 물질, 벌레에 견딥니다. 올바르게 시공하면 3년 광택 보증이 적용됩니다.
- Brand
- servFaces
- Categories
- Exterior : Coating
Key features
- Hybrid polymer hard coating for paint
- Bonds chemically to surface pores via a molecular matrix
- Raises paint hardness by about 40-45%
- Resists oxidation, salt, acids (pH 2-13), and insects
- Yellowing-proof and abrasion resistant
- 3-year gloss guarantee when properly applied
Usage
- Clean the surface with Surface Cleaner Ultima, then neutralize with Surface Cleaner Neutra.
- Put the application cloth on the applicator and add 12-18 drops of Suave HSH-Technology to it.
- Spread the product quickly section by section, working at most half a hood at a time, until a visible film forms.
- Let it react for about 1-3 minutes depending on quantity, humidity, and temperature.
- Remove excess with a fresh Special Coating Towel, starting at the edges and working inward in straight quick strokes.
- Polish with a second fresh Special Coating Towel under light pressure, from the edges inward in circular motions.
- If streaks remain, repeat with another fresh towel until the surface is streak-free under a light source.
- Recoating is possible after 20 minutes but must be done within 35 minutes.
핵심 특징
- 도장면용 하이브리드 폴리머 하드 코팅
- 분자 매트릭스로 표면 기공에 화학 결합
- 도장 경도 약 40~45% 향상
- 산화, 염분, 산성 물질(pH 2~13), 벌레에 견딤
- 황변 방지 및 내마모성
- 올바른 시공 시 3년 광택 보증
사용법
- 서피스 클리너 울티마로 표면을 세정한 뒤 서피스 클리너 뉴트라로 중화합니다.
- 어플리케이터에 도포 천을 올리고 수아베 HSH 테크놀로지를 12~18방울 떨어뜨립니다.
- 한 번에 최대 후드 절반씩 구획별로 빠르게 펴 발라 눈에 보이는 막을 만듭니다.
- 도포량, 습도, 온도에 따라 약 1~3분간 반응시킵니다.
- 새 스페셜 코팅 타월로 가장자리부터 안쪽으로 직선으로 닦아 여분을 제거합니다.
- 다른 새 스페셜 코팅 타월로 가볍게 눌러 가장자리부터 안쪽으로 원을 그리며 광을 냅니다.
- 얼룩이 남으면 광원 아래에서 사라질 때까지 새 타월로 반복합니다.
- 20분 후 재코팅할 수 있으나 35분 이내에 마쳐야 합니다.