Adam's Bed Liner Restorer
아담스 베드 라이너 리스토러
Adams Bed Liner Restorer is an acrylic-based spray coating that quickly revitalizes worn truck bed liners and rough plastics, restoring a like-new matte appearance without creating a slippery surface. It is UV-resistant, water-resistant, and easy to apply with no masking required on most surfaces.
아크릴 기반의 스프레이 코팅으로 낡고 거친 트럭 베드 라이너와 플라스틱 표면을 빠르게 복원하여 새것 같은 매트한 마감을 되돌립니다. 미끄럽지 않아 적재 시에도 안전하며, UV와 수분에 강해 외장에서도 내구성 있게 유지됩니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Coating
- pH
- neutral (7)
Key features
- Acrylic-based sprayable restoring coating
- Restores matte, like-new appearance
- Non-slip surface finish
- UV and water resistant
- Easy spray application with no masking needed
Usage
- Clean the bed liner or plastic surface thoroughly with a degreaser and allow it to dry completely.
- Shake the bottle well and hold it about 8 to 12 inches from the surface, then apply an even coat using steady, overlapping passes.
- Allow the first coat to dry for several minutes, then apply a second coat for deeper coverage if desired.
- Allow the coating to cure fully before loading the truck bed or exposing the surface to moisture.
핵심 특징
- 아크릴 기반 스프레이 복원 코팅
- 새것 같은 매트 마감 복원
- 논-슬립 표면 마감
- UV·수분 저항성
- 마스킹 없이 간편한 스프레이 도포
사용법
- 탈지제로 베드 라이너나 플라스틱 표면을 깨끗이 세정한 뒤 완전히 건조시키세요.
- 병을 잘 흔든 뒤 표면에서 약 20~30cm 거리에서 균일하게 겹치는 패턴으로 1회 도포하세요.
- 첫 번째 코팅이 몇 분간 건조된 후, 더 깊은 커버리지를 원하면 2회 코팅을 추가하세요.
- 적재 작업을 시작하거나 수분에 노출되기 전 코팅이 완전히 경화될 때까지 기다리세요.