Motorbike
모터바이크
Wax is Dead Motorbike · 왁스 이즈 데드 모터바이크
Wax is Dead Motorbike is a purpose-built single-layer ceramic coating for motorcycles, chemically bonding to all surfaces and providing up to two years of protection per application. It offers 9H hardness, thermal resistance up to 1100°C, and extreme hydrophobic performance, enriching paintwork with a deep gloss while making the surface resistant to chemicals, UV, and corrosion.
왁스 이즈 데드 모터바이크는 오토바이 전용으로 개발된 단일 레이어 세라믹 코팅으로, 모든 표면에 화학적으로 결합하여 한 번 시공으로 최대 2년간 보호 성능을 제공합니다. 9H 경도와 최대 1100°C의 내열성 및 강력한 발수 성능을 갖추며, 도장에 깊은 광택을 더하면서 화학물질, 자외선, 부식에 대한 내성을 제공합니다.
- Brand
- Wax is Dead
- Categories
- Exterior : Coating
Key features
- Up to 2 years durability from one application
- 9H hardness
- Thermal resistance up to 1100°C
- Superhydrophobic surface protection
- Chemical and UV resistance
- Anti-corrosion protection
- High gloss finish
- Suitable for all motorbike surfaces
Usage
- Shake the bottle before use.
- Apply Wax is Dead Cleaner to all surfaces to prepare them.
- Ensure the surface is completely dry before applying the coating.
- Load the coating onto the applicator pad and spread it evenly over the prepared surface.
- Remove residue after 20–60 seconds depending on ambient temperature and humidity.
- Keep the coated surface dry for the next 24 hours.
핵심 특징
- 한 번 시공으로 최대 2년 내구성
- 9H 경도
- 최대 1100°C 내열성
- 초발수 표면 보호
- 내화학성 및 자외선 차단
- 부식 방지 보호
- 고광택 마감
- 오토바이 전 표면에 사용 가능
사용법
- 사용 전 병을 충분히 흔드세요.
- 왁스 이즈 데드 클리너로 모든 표면을 닦아 전처리하세요.
- 코팅 전 표면이 완전히 건조되었는지 확인하세요.
- 도포 패드에 코팅제를 묻혀 준비된 표면에 고르게 펴 바르세요.
- 온도와 습도에 따라 20~60초 후 잔여물을 닦아내세요.
- 시공 후 24시간 동안 코팅 표면이 젖지 않도록 유지하세요.