Graphene Coating

그래핀 코팅

Graphene Coating is a next-generation protective coating based on carbon graphene technology originally developed for aerospace and marine applications. Applied to a vehicle's exterior, it delivers 3 to 6 years of durability far exceeding conventional coatings. Its high thermal conductivity rapidly disperses heat from the paint surface, effectively preventing water spots from forming.

그래핀 코팅은 항공기 및 선박에도 사용되는 탄소 그래핀 기술을 기반으로 한 차세대 보호 코팅제입니다. 차량 외장에 적용 시 기존 코팅을 훨씬 뛰어넘는 3~6년의 내구성을 실현합니다. 높은 열전도성으로 도장면의 열을 빠르게 분산시켜 물자국 생성을 강력히 억제합니다.

Brand
SPASHAN
Categories
Exterior : Coating
Primary dilution
RTU

Key features

Dilution

Usage

  1. Wash the vehicle thoroughly and, as needed, remove iron particles and polish the surface to create a clean base.
  2. Remove all existing coatings and wax residues completely, as they will weaken the adhesion of this coating.
  3. Apply a small amount to a sponge and spread it thinly and evenly over the surface.
  4. Allow to dry for 3 to 5 minutes, then wipe off with a dry towel — slight resistance when wiping indicates the surface is ready.
  5. Test on an inconspicuous area first to determine the correct drying time before treating the whole surface.

핵심 특징

  • 차량 외장 3~6년 내구성
  • 열 적용 시 자기 복원 기능
  • 염해 및 노면 제설제에 대한 내식성
  • 산성 및 알칼리성 약품에 대한 내화학성
  • 약 1200℃의 내열성
  • 높은 열전도성으로 물자국 방지
  • 유리 및 미도장 수지 부품에도 적용 가능

사용법

  1. 차량을 깨끗이 세차하고, 필요에 따라 철분 제거 및 연마 작업으로 도장면을 충분히 정돈하세요.
  2. 기존 코팅제나 왁스 잔여물이 남아 있으면 밀착력이 약해지므로 반드시 완전히 제거하세요.
  3. 스펀지에 소량을 덜어 표면에 얇고 균일하게 펴 바릅니다.
  4. 3~5분간 건조 후 마른 타올로 닦아내세요. 타올에 약간의 저항감이 생기면 건조가 완료된 것입니다.
  5. 전체 시공 전에 눈에 잘 띄지 않는 부분에 먼저 시공해 적절한 건조 시간을 파악하세요.

Also known as: 스파샨, SPASHAN Graphene Coating, GC, SPASHAN GC, 스파샨 그래핀 코팅, 스파샨 GC

한국어로 보기

Sources