Fine Cut
파인 컷
Fine Cut is a finishing polishing compound formulated to remove minor scratches and holograms, leaving a flawless, high-gloss paint surface. It is ideal as the final stage of a paint correction process and for preparing freshly painted surfaces before coating application. The water-based formula generates no dust and contains no fillers, silicones, or waxes, enabling easy residue removal after polishing.
Fine Cut은 잔 스크래치와 홀로그램을 제거하여 완벽한 고광택 도장 마감을 만드는 피니싱 폴리싱 컴파운드입니다. 도장 보정의 마지막 단계 또는 코팅 전 신차 도장 전처리에 최적입니다. 수성 포뮬러로 먼지가 발생하지 않으며 충전제·실리콘·왁스를 함유하지 않아 폴리싱 후 잔여물을 빠르게 제거할 수 있습니다.
- Brand
- Ultra Coat
- Categories
- Exterior : Polishes
Key features
- Removes fine scratches and holograms
- Delivers spectacular gloss and perfect finish
- Water-based formula, no dust generation
- No fillers, silicones, or waxes
- Removes matting P3000
- Suitable for all polishing machine types; best with Dual Action
Usage
- Shake the product before use.
- Ensure the surface is clean and cool.
- Apply 4-5 drops onto the finishing polishing pad.
- Polish with moderate pressure, working sections of approximately 50 x 50 cm until a smooth paste is achieved.
- After polishing, remove any remaining polish with Ultracoat Finest Wipe.
핵심 특징
- 잔 스크래치 및 홀로그램 제거
- 화려한 광택과 완벽한 마감
- 수성 포뮬러, 먼지 발생 없음
- 충전제·실리콘·왁스 미함유
- P3000 연마 자국 제거
- 모든 폴리셔 호환, 듀얼 액션 머신 최적
사용법
- 사용 전 제품을 충분히 흔들어 줍니다.
- 도장 표면이 깨끗하고 차가운 상태인지 확인합니다.
- 피니싱 패드에 컴파운드를 4~5방울 도포합니다.
- 약 50x50cm 범위를 기준으로 페이스트 상태가 될 때까지 적당한 압력으로 폴리싱합니다.
- 폴리싱 후 잔여물은 울트라코트 Finest Wipe로 닦아냅니다.
Also known as: 울트라, 울트라코트, ultra, ULTRACOAT Fine Cut, Ultra Coat Fine Cut, UC Fine Cut, FC, ULTRACOAT FC, UC FC, 울트라코트 파인 컷, 울트라코트 FC
한국어로 보기
Sources