Optimum Hyper Compound Revision 5 Spray
옵티멈 하이퍼 컴파운드 리비전 5 스프레이
Optimum Hyper Compound Revision 5 is a sprayable heavy-cut compound that removes sanding marks up to about 2,000 grit, deep swirl marks, and oxidation while leaving a near-finished surface. The filler-free, non-dusting formula is body-shop safe and leaves surfaces ready for ceramic coating without a separate IPA prep step.
약 2,000그릿까지의 샌딩 마크, 깊은 스월, 산화막을 제거하면서 마감에 가까운 광택을 남기는 분사형 강한 커팅 컴파운드입니다. 필러가 없고 먼지가 날리지 않아 바디샵에서도 안전하게 사용할 수 있으며, 시공 후 별도 IPA 와이프 없이 세라믹 코팅을 바로 진행할 수 있습니다.
- Brand
- OPTI-COAT
- Categories
- Exterior : Polishes
Key features
- Sprayable heavy-cut compound
- Up to about 2,000-grit sanding mark removal
- Filler-free and non-dusting
- Body-shop safe
- Ceramic coating ready after use
Usage
- Prime a foam cutting pad with two or three sprays of Hyper Compound, then add one to two sprays per panel during work.
- Run a rotary buffer at about 1,000-1,500 RPM or a DA polisher at speed 4-5 with a cutting pad.
- Work each area until heavy defects are fully removed and the product becomes clear, taking advantage of the extended working time.
- Wipe away residue with a damp No Rinse microfiber and follow with Hyper Polish for a refined final finish if needed.
핵심 특징
- 분사형 강한 커팅 컴파운드
- 약 2,000그릿 샌딩 마크 제거
- 필러 무첨가·무분진
- 바디샵 안전
- 시공 후 세라믹 코팅 가능
사용법
- 커팅 폼 패드에 Hyper Compound를 2-3회 분사해 프라이밍하고, 작업 중 패널당 1-2회씩 추가 분사합니다.
- 로터리 버퍼 약 1,000-1,500 RPM 또는 DA 폴리셔 4-5단에 커팅 패드를 사용합니다.
- 심한 결함이 완전히 제거되고 제품이 투명해질 때까지 작업하며, 충분한 작업 시간을 활용합니다.
- No Rinse를 묻힌 극세사로 잔여물을 닦아낸 뒤 필요하면 Hyper Polish로 마무리 광택을 냅니다.