Find Your Detail · Product catalogue · Brands · What detailers use · About

TAC System Water Flow Coat Dilution Ratios & User Guide

TAC System Water Flow Coat dilution ratio and pH specification chart

워터 플로우 코트

TAC System Water Flow Coat — Exterior : Coating, base dilution 1:100. At 1:100, mix about 10 ml of TAC System Water Flow Coat per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/tac-system/water-flow-coat

TAC System 워터 플로우 코트 — Exterior : Coating, 기본 희석 1:100. 1:100 기준 물 1L당 TAC System 워터 플로우 코트 약 10ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/tac-system/water-flow-coat

A highly concentrated spray-and-rinse coating applied to a wet vehicle straight after washing. One bottle makes up to 30 litres of working solution and each application lasts around three to four months. It suits high-volume shops offering a quick wash-and-coat service and reaches areas that are hard to hand-coat such as wheels, grilles, roofs and truck beds.

세차 직후 젖은 차량에 뿌리고 헹궈내는 고농축 코팅제입니다. 한 병으로 최대 30L의 작업액을 만들 수 있고 1회 시공으로 약 3~4개월 지속됩니다. 빠른 세차 후 코팅 서비스를 제공하는 대형 샵에 적합하며 휠, 그릴, 지붕, 트럭 적재함처럼 손으로 코팅하기 어려운 부위에 유용합니다.

Brand
TAC System
Categories
Exterior : Coating, Exterior : Foam
Primary dilution
1:100
Last updated
2026-09-02

Key features

  • Hyper-concentrated, makes up to 30 L of solution
  • Spray-on, rinse-off application
  • Three to four months of durability per application
  • Reaches wheels, grilles, engine bays and truck beds
  • Safe on glass and will not whiten trim

Dilution

UseDilutionRatio
Exterior : Coating (primary)1:1001:100
Exterior : Foam1:501:50

Usage

  1. Wash the vehicle and rinse the suds off.
  2. While the vehicle is still wet, spray the diluted Water Flow Coat over the surface.
  3. Let it dwell for a few seconds, then rinse it off.

핵심 특징

  • 최대 30L 작업액을 만드는 고농축 제품
  • 뿌리고 헹구는 방식의 시공
  • 1회 시공 시 약 3~4개월 지속
  • 휠, 그릴, 엔진룸, 적재함까지 도포 가능
  • 유리에 안전하고 몰딩을 하얗게 만들지 않음

사용법

  1. 차량을 세차하고 거품을 헹궈냅니다.
  2. 차량이 젖어 있는 상태에서 희석한 워터 플로우 코트를 분사합니다.
  3. 몇 초간 두었다가 물로 헹궈냅니다.

Also known as: TAC System Water Flow Coat, TACSYSTEM Water Flow Coat, TAC Water Flow Coat, WFC, TAC System WFC, TAC WFC, 탁시스템 워터 플로우 코트, 탁시스템 WFC

한국어로 보기

Sources

  • TAC System official product page

Related products

More from TAC System

  • Quartz Deluxe
  • Tac Hyeong Wax
  • Moonlight
  • Refinish Ultra One Step Compound
  • Water Spot Zero
  • Total One Essential

More Coating products

  • Ethos Car Care MAX Graphene Coating
  • Swissvax Glacier
  • Sonax PROFILINE PolymerNetShield
  • Adam's Polishes Adam's UV Ceramic Wheel Coating
  • ProStaff CC WATER CLEAN COATING
  • SENSHA Metal Plating Crystal

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)