Find Your Detail · Product catalogue · Brands · What detailers use · About

TAC System Magic Plus Wheel Coating User Guide

TAC System Magic Plus Wheel Coating dilution ratio and pH specification chart

매직 플러스 휠 코팅

TAC System Magic Plus Wheel Coating — Exterior : Tire&Wheel Sealant. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/tac-system/magic-plus-wheel-coating

TAC System 매직 플러스 휠 코팅 — Exterior : Tire&Wheel Sealant. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/tac-system/magic-plus-wheel-coating

A 60% Si ceramic coating engineered for adhesion across many substrates and heat resistance up to 800C, which makes it the choice for wheels, brake calipers and exhausts. Compared with the higher-concentration paint coatings it trades some gloss for far stronger bonding resins, so it stays put on surfaces that expand and contract with heat. Two coats bring the finish to a 9H hardness, and it also works on trim, PPF, wraps including matte, chrome, aluminium, powder coat and plastics.

다양한 소재에 대한 밀착력과 800도까지의 내열성을 목표로 개발한 Si 60% 세라믹 코팅제로, 휠과 브레이크 캘리퍼, 배기구에 적합합니다. 고농도 도장용 코팅에 비해 광택은 조금 양보하는 대신 결합 수지를 크게 강화해 열로 팽창과 수축을 반복하는 표면에서도 떨어지지 않습니다. 2회 도포 시 9H 경도를 내며 몰딩, PPF, 무광 포함 랩핑, 크롬, 알루미늄, 분체도장, 플라스틱에도 사용할 수 있습니다.

Brand
TAC System
Categories
Exterior : Tire&Wheel Sealant, Exterior : Coating
Last updated
2026-09-02

Key features

  • 60% Si concentration tuned for adhesion
  • Heat resistant up to 800C
  • 9H hardness at two coats
  • Works on wheels, calipers, exhausts and trim
  • Darkens matte wraps and textured trim

Usage

  1. Decontaminate the surface first with Iron Zero, clay, polishing and an Oil Zero wipe-down.
  2. Apply the coating panel by panel and buff off after roughly 30 to 60 seconds.
  3. Wait four to twelve hours between coats depending on temperature and humidity.
  4. Apply a second coat, which makes a clear difference to the result.
  5. Keep the surface away from water for four to seven days while it cures.

핵심 특징

  • 밀착력 중심의 Si 60% 함량
  • 800도까지 견디는 내열성
  • 2회 도포 시 9H 경도
  • 휠, 캘리퍼, 배기구, 몰딩에 사용 가능
  • 무광 랩핑과 요철 몰딩의 색감을 짙게 함

사용법

  1. 아이언 제로, 클레이, 폴리싱, 오일 제로 탈지로 표면의 고착 오염을 먼저 제거합니다.
  2. 구획별로 도포하고 약 30~60초 후에 닦아냅니다.
  3. 온도와 습도에 따라 4~12시간 간격을 두고 다음 도포를 진행합니다.
  4. 2회차 도포는 결과 차이가 크므로 반드시 진행합니다.
  5. 경화되는 4~7일 동안 물이 닿지 않도록 합니다.

Also known as: TAC System Magic Plus Wheel Coating, TACSYSTEM Magic Plus Wheel Coating, TAC Magic Plus Wheel Coating, MP, TAC System MP, TAC MP, 탁시스템 매직 플러스 휠 코팅, 탁시스템 MP

한국어로 보기

Sources

  • TAC System official product page

Related products

More from TAC System

  • Aqua Waterless Wash
  • Fabric Coat
  • Quartz Climax 2
  • Metal Polish
  • Nano Diamond Graphene Coat
  • Refinish R2 Medium Cutting Polish

More Tire&Wheel Sealant products

  • KATIBA Wheel Coating
  • Dr. Beasley's Matte Tire Conditioner
  • Dr. Beasley's Wheel Detailer
  • FX Protect Tire & Rubber Protection
  • SENSHA Oleaginous Tire Wax Professional
  • Autobrite Direct Tyre Gloss

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)