XTREME Ceramic Polish All-in-One
익스트림 세라믹 폴리시 올인원
A single-step ceramic polish that simultaneously corrects, smooths, and seals paintwork without requiring follow-up products. Si-Carbon technology creates a velvety surface with durable mirror-like shine while depositing a dirt-repellent protective layer. The protection and water-repellent effect last up to about two months and the product works both by hand and with a polishing machine.
연마, 스무딩, 실링을 한 단계에서 완성하는 세라믹 올인원 폴리시입니다. 추가 제품 없이 스크래치와 탁한 부위를 제거하는 동시에 방오 보호막을 형성하며, Si-카본 기술로 벨벳처럼 부드럽고 거울 같은 지속 광택을 만들어 냅니다. 보호 효과와 발수 성능이 약 최대 2개월 지속되며 수작업과 머신 작업 모두 가능합니다.
- Brand
- Sonax
- Categories
- Exterior : Polishes, Exterior : Coating
Key features
- Single-step polish, smooth, and seal in one application
- Removes scratches and dull spots while forming a dirt-repellent layer simultaneously
- Si-Carbon technology for velvety surface with durable mirror-like shine
- Protection and water repellency lasting up to about 2 months
- Suitable for hand and machine use
Usage
- Pre-treat bare plastic and rubber trim with an exterior plastic gel to prevent white residue marks.
- Pre-treating the trim minimises the risk of white staining from polish residue during the polishing process.
- Shake the bottle before use for consistent product texture throughout the job.
- Apply a thin layer to the paint with a P-Ball or sponge applicator and polish immediately using medium pressure.
- Complete each full body section, such as the bonnet or roof, in one continuous pass.
- Allow the product to haze slightly before removal.
- Buff off residue with a clean exterior microfibre cloth.
- When using a machine, a rotary with a medium foam pad delivers the best results.
- Do not apply to hot or warm surfaces.
- Store the product in a frost-free location.
핵심 특징
- 연마·스무딩·실링을 한 번에 완성하는 원스텝 폴리시
- 스크래치·탁한 부위 제거와 방오 보호막 동시 형성
- Si-카본 기술로 벨벳 표면과 거울 같은 지속 광택
- 약 최대 2개월 보호 및 발수 효과
- 수작업 및 머신 작업 모두 지원
사용법
- 미도장 플라스틱·고무 트림은 외장용 플라스틱 젤로 사전 처리하세요.
- 트림을 미리 처리하면 폴리싱 중 폴리시 잔여물로 인한 백화 흔적을 최소화할 수 있습니다.
- 균일한 농도를 위해 작업 전 용기를 흔들어 주세요.
- P-볼이나 스펀지 어플리케이터로 도장면에 얇게 바르고 중간 압력으로 즉시 폴리싱하세요.
- 보닛, 루프 등 각 패널 구간을 한 번에 끊김 없이 마무리하세요.
- 제품이 약간 뿌옇게 변할 때까지 잠시 두세요.
- 깨끗한 외장용 극세사 천으로 잔여물을 버핑해 닦아내세요.
- 머신 사용 시에는 미디엄 폼 패드를 장착한 로터리 폴리셔가 최상의 결과를 제공합니다.
- 표면이 뜨겁거나 따뜻할 때는 사용하지 마세요.
- 동결되지 않는 장소에 보관하세요.