PROFILINE CeramicCoating CC Evo
프로피라인 세라믹코팅 CC 에보
CC Evo is a professional ceramic coating engineered to provide notable depth, gloss, and long-term paint protection. The formula creates a very hard, self-cleaning surface layer that repels water, contamination, and UV radiation, substantially extending the lifespan of the underlying paint finish. Designed for professional detailers requiring high durability.
두드러진 광택 깊이, 선명도, 장기적인 도장 보호를 제공하도록 설계된 프로페셔널 세라믹 코팅입니다. 매우 단단한 자가 세정 표면 레이어를 형성해 물, 오염, UV를 반발하고 도장 마감의 수명을 크게 연장합니다. 높은 내구성을 요구하는 전문 디테일러를 위해 설계되었습니다.
- Brand
- Sonax
- Categories
- Exterior : Coating
- pH
- neutral (7)
Key features
- Professional-grade ceramic coating for noticeable gloss and depth
- Very hard layer creates a self-cleaning, hydrophobic surface
- Repels water, contamination, and UV radiation
- Substantially extends paintwork lifespan
Usage
- Decontaminate, polish, and wipe the paint surface with a panel wipe before starting.
- Ensure the work area is dust-free and between about 15 and 25 degrees Celsius.
- Apply a few drops of CC Evo to a suede ceramic applicator block.
- Spread in straight, overlapping passes across one panel at a time.
- Allow the coating to flash off — watch for a rainbow or streaky haze.
- Buff with a clean, soft microfibre cloth immediately when ready.
- Inspect under a work light for any high spots and level them promptly.
- Allow each panel to cure before moving to the next section.
- Leave the vehicle undisturbed for at least 24 hours after completing all panels.
- Avoid water contact and parking under trees during the full curing period.
핵심 특징
- 두드러진 광택과 깊이를 위한 프로페셔널 세라믹 코팅
- 매우 단단한 레이어로 자가 세정 소수성 표면 형성
- 물, 오염, UV 반발
- 도장 수명 대폭 연장
사용법
- 작업 전 도장면을 오염 제거, 폴리싱한 뒤 패널 와이프로 닦아 주세요.
- 작업 공간이 먼지 없는 환경이며 약 15~25도 사이의 온도인지 확인하세요.
- 스웨이드 세라믹 어플리케이터 블록에 CC Evo를 몇 방울 떨어뜨리세요.
- 한 번에 하나의 패널씩 겹치는 직선 방향으로 고르게 펴 바르세요.
- 코팅이 플래시 오프될 때까지 기다리세요 — 무지개빛 또는 줄무늬 헤이즈가 나타납니다.
- 준비가 되면 즉시 깨끗하고 부드러운 극세사 타월로 닦아 내세요.
- 작업 조명 아래에서 하이 스팟을 확인하고 즉시 평탄화하세요.
- 다음 섹션으로 이동하기 전 각 패널이 경화될 때까지 두세요.
- 모든 패널 작업 완료 후 최소 24시간 동안 차량을 그대로 두세요.
- 완전한 경화 기간 동안 물 접촉과 나무 아래 주차를 피하세요.