Iron+Fallout Remover
아이언+폴아웃 리무버
Iron Plus Fallout Remover chemically reacts with ferrous particles embedded in paint, wheels, and bodywork, turning a vivid colour that signals active contamination removal. It dissolves iron deposits and other fallout safely without abrasion, leaving surfaces clean and ready for further treatment.
도장, 휠, 차체에 박혀 있는 철분 입자와 화학 반응해 선명하게 색이 변하며 오염 제거가 진행 중임을 알려 주는 낙진 제거제입니다. 연마 없이 철분 오염과 각종 낙진을 안전하게 용해하며, 표면을 깨끗하게 처리 준비 상태로 만들어 줍니다.
- Brand
- Sonax
- Categories
- Exterior : Remover
- pH
- neutral (7)
Key features
- Chemical reaction with iron particles provides visible colour-change indicator
- Removes ferrous fallout and embedded particles without abrasion
- Safe for paint, wheels, and bodywork
Usage
- Rinse the surface with water first to remove loose dirt.
- Spray the product generously onto the target area.
- Watch for the colour change that indicates the formula is reacting with iron deposits.
- Allow the product to dwell for about 3 to 5 minutes — do not let it dry.
- Agitate gently with a soft brush on heavily contaminated areas.
- Rinse thoroughly with clean water.
- Repeat if necessary for heavy contamination.
- Follow up with a clay bar or protective coating as desired.
핵심 특징
- 철분 입자와의 화학 반응으로 눈에 보이는 색상 변화 표시
- 연마 없이 철분 낙진 및 박힌 오염 입자 제거
- 도장, 휠, 차체에 안전
사용법
- 먼저 물로 표면을 헹궈 느슨한 오염을 제거하세요.
- 대상 부위에 제품을 충분히 분사하세요.
- 철분 오염과 반응이 시작되면 나타나는 색상 변화를 확인하세요.
- 약 3~5분간 반응시키되, 건조되지 않도록 주의하세요.
- 오염이 심한 부위는 부드러운 브러시로 가볍게 문질러 주세요.
- 깨끗한 물로 충분히 헹궈 주세요.
- 오염이 심할 경우 반복 작업하세요.
- 이후 클레이바 또는 코팅 처리를 진행하세요.