InSynchro V43 Precision Cut Compound
인싱크로 V43 프리시전 컷 컴파운드
InSynchro V43 Precision Cut Compound tackles scratches, swirl marks, oxidation, water spots, and moderate paint defects with a low-dust, water-based formula. Its adaptive abrasive particles gradually reduce in size during use, delivering effective correction in fewer passes so you spend less time at the machine.
V43은 스월, 스크래치, 산화, 워터스팟 등 중등도 도장 결함을 효율적으로 개선하는 컴파운드입니다. 작업 중 입자 크기가 줄어드는 어댑티브 연마재 덕분에 적은 패스로도 균일한 결과를 얻을 수 있으며, 수성 포뮬러라 분진도 거의 발생하지 않습니다.
- Brand
- Chemical Guys
- Categories
- Exterior : Polishes
- pH
- neutral (8)
Key features
- Adaptive abrasive particles diminish in size during use, enabling faster correction with fewer machine passes.
- Addresses heavy to moderate scratches, swirl marks, oxidation, and water spots; compatible with dual-action and rotary polishers.
- Water-based, low-residue formula suits both hobbyist and professional detailing environments.
Usage
- By Hand: Shake well. Apply 4–5 drops to an applicator pad. Using moderate pressure, work one section at a time in circular motions. Remove residue with a clean microfiber towel.
- By Polisher: Shake well. Apply 4–5 drops to your chosen pad. Condition the pad with pad primer, then dab the product evenly across a 2′ × 2′ section.
- DA / Random Orbital: With the pad resting on the paint, start at speed 1 to spread the product. Increase to speed 5–6 and, with moderate pressure, work the area in 2–3 passes until the product clears. Finish with a light-pressure pass. Wipe off residue with a clean microfiber towel.
- Rotary: With the pad off the paint, start at 1000–1500 RPM, then lower onto the surface and spread the compound. Using only the machine’s own weight (no added pressure), work each area in 3–4 passes. For the final pass, adjust to 1200–1800 RPM and work until optical clarity is achieved. Remove residue with a clean microfiber towel.
- For a refined final result, follow up with InSynchro V45 Supreme Finish Polish.
핵심 특징
- 작업 중 연마 입자가 점차 미세해져 적은 패스로 효과적인 도장 결함 개선 가능
- 듀얼 액션·로터리 폴리셔 모두 호환, 중~강도 결함 처리에 적합
- 수성 저잔류 포뮬러로 가정 및 전문 디테일링 환경 모두 활용 가능
사용법
- 핸드 작업: 제품을 흔든 뒤 패드에 4–5방울 도포. 중간 압력으로 원형 동작을 사용해 한 구역씩 작업합니다. 잔류물은 극세사 타월로 닦아냅니다.
- 폴리셔 사용: 제품을 흔든 뒤 패드에 4–5방울 도포. 패드 컨디셔너로 패드를 정돈하고 약 60 cm × 60 cm 구역에 제품을 고루 찍어 바릅니다.
- DA 폴리셔: 패드를 도장에 댄 채 속도 1로 시작해 제품을 펴 바릅니다. 속도 5–6으로 높이고 중간 압력으로 2–3패스 작업 후 가벼운 압력으로 마무리합니다. 극세사 타월로 잔류물을 닦아냅니다.
- 로터리: 패드를 도장에서 떼고 1000–1500 RPM으로 시작, 도장에 얹은 뒤 제품을 퍼뜨립니다. 기계 자체 무게만으로 3–4패스 작업 후 1200–1800 RPM으로 광학적 투명도가 나올 때까지 마무리합니다. 극세사 타월로 잔류물을 제거합니다.
- 더 높은 광택을 원한다면 InSynchro V45 수프림 피니시 폴리시로 마무리 작업을 이어가십시오.