PAICAR Snow Foam Dilution Ratios & User Guide

PAICAR Snow Foam dilution ratio and pH specification chart

스노우 폼

PAICAR Snow Foam — Exterior : Foam, alkali pH, base dilution 1:10~1:15. At 1:10, mix about 100 ml of PAICAR Snow Foam per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/paicar/snow-foam

PAICAR 스노우 폼 — Exterior : Foam, pH alkali, 기본 희석 1:10~1:15. 1:10 기준 물 1L당 PAICAR 스노우 폼 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/paicar/snow-foam

Snow Foam is an alkaline pre-wash built on biodegradable sugar-derived surfactants that degreases and decontaminates strongly without caustic components. Its thick, clinging foam extends dwell time to soften and lift road film, grease, organic residues and urban grime before contact washing, lowering swirl-mark risk. It is safe on all exterior surfaces including paint, glass, plastics, wheels and trims.

스노우 폼은 생분해성 당 유래 계면활성제를 바탕으로 가성 성분 없이 강하게 탈지하고 오염을 제거하는 알칼리성 사전 세척제입니다. 두껍고 밀착되는 거품이 반응 시간을 늘려 접촉 세차 전에 도로 막, 유분, 유기 잔여물, 도심 오염을 부드럽게 들어 올려 스월 마크 위험을 낮춥니다. 도장, 유리, 플라스틱, 휠, 트림 등 모든 외장 표면에 안전합니다.

Brand
PAICAR
Categories
Exterior : Foam, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:10~1:15
pH
alkali (12)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-05-29

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:10~1:151:10-15
Exterior : Pre-washing (Pretreatment)1:100~1:1501:100-150

Usage

  1. Shake well before use.
  2. Dilute in a foam cannon with warm or cold water.
  3. Apply foam to a cool vehicle in the shade, covering all exterior surfaces.
  4. Let sit for 2 to 4 minutes, keeping the product from drying.
  5. Rinse thoroughly with high-pressure water.
  6. Proceed with contact washing.

핵심 특징

  • 알칼리성이지만 가성 성분이 없는 포뮬러, 모든 외장 표면에 안전
  • 생분해성 식물 유래 계면활성제 함유
  • 도로 오염, 유분, 유기 잔여물, 환경 오염물 제거
  • 긴 반응 시간을 위한 두껍고 오래가는 거품 생성
  • 도장, 유리, 플라스틱, 휠, 트림과 호환

사용법

  1. 사용 전 용기를 잘 흔들어 주세요.
  2. 폼 캐넌에 온수 또는 냉수와 함께 희석합니다.
  3. 그늘에서 식은 차량 외부 전체에 거품을 도포합니다.
  4. 2~4분간 두되 제품이 마르지 않게 합니다.
  5. 고압수로 충분히 헹궈냅니다.
  6. 이후 접촉 세차를 진행합니다.

Also known as: PAI, 파이카, 파이, PAICAR Snow Foam, SF, PAICAR SF, 파이카 스노우 폼, 파이카 SF

한국어로 보기

Sources

Related products

More from PAICAR

More Foam products

Explore more