PAICAR Ultra Snow Foam Dilution Ratios & User Guide

PAICAR Ultra Snow Foam dilution ratio and pH specification chart

울트라 스노우 폼

PAICAR Ultra Snow Foam — Exterior : Foam, alkali pH, base dilution 1:10~1:15. At 1:10, mix about 100 ml of PAICAR Ultra Snow Foam per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/paicar/ultra-snow-foam

PAICAR 울트라 스노우 폼 — Exterior : Foam, pH alkali, 기본 희석 1:10~1:15. 1:10 기준 물 1L당 PAICAR 울트라 스노우 폼 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/paicar/ultra-snow-foam

Ultra Snow Foam is a concentrated alkaline pre-wash for heavily soiled vehicles or those being prepped for polishing and protective treatments. Its strong degreasing and decontaminating action quickly breaks down stubborn dirt, road film, grease and organic residues, lowering swirl-mark risk during the contact wash that follows. It works with foam cannons or pressure sprayers across a wide range of exterior surfaces.

울트라 스노우 폼은 심하게 오염된 차량이나 광택·보호 코팅을 앞둔 차량을 위한 고농축 알칼리성 사전 세척제입니다. 강한 탈지와 오염 제거 작용으로 완고한 오염, 도로 막, 유분, 유기 잔여물을 빠르게 분해해 뒤이은 접촉 세차에서 스월 마크 위험을 낮춥니다. 폼 캐넌이나 고압 스프레이어로 다양한 외장 표면에 쓸 수 있습니다.

Brand
PAICAR
Categories
Exterior : Foam, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:10~1:15
pH
alkali (14)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-05-29

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:10~1:151:10-15
Exterior : Pre-washing (Pretreatment)1:100~1:1501:100-150

Usage

  1. Shake well before use.
  2. Dilute in a foam cannon or pressure sprayer.
  3. Apply evenly over the whole exterior, working bottom to top.
  4. Leave to act for up to 60 seconds and do not let it dry on the surface.
  5. Rinse thoroughly with high-pressure water.
  6. Proceed with contact washing.

핵심 특징

  • 빠르게 작용하는 고농축 알칼리성 포뮬러
  • 유분, 도로 막, 유기 잔여물, 심한 오염 제거
  • 수동 세차 시 스월 마크 위험 감소
  • 광택 또는 코팅 전 표면 준비에 적합
  • 폼 캐넌 또는 고압 스프레이어와 호환

사용법

  1. 사용 전 용기를 잘 흔들어 주세요.
  2. 폼 캐넌이나 고압 스프레이어에 희석합니다.
  3. 차량 외부 전체에 아래에서 위로 균일하게 도포합니다.
  4. 최대 60초간 두되 표면에서 마르지 않게 합니다.
  5. 고압수로 충분히 헹궈냅니다.
  6. 이후 접촉 세차를 진행합니다.

Also known as: PAI, 파이카, 파이, PAICAR Ultra Snow Foam, USF, PAICAR USF, 파이카 울트라 스노우 폼, 파이카 USF

한국어로 보기

Sources

Related products

More from PAICAR

More Foam products

Explore more