Foaming Surface Wash
포밍 서피스 워시
A pH-neutral snow foam formulated for THE BOSS Foam Cannon Auto-Mix system that gently loosens, lifts, and encapsulates contaminants to deep-clean paint without inducing wash scratches. The dual-layer foam clings to the surface and provides extended dwell times of up to 10 minutes while preserving existing waxes and sealants.
THE BOSS 폼 캐논 오토믹스 시스템 전용 pH 중성 스노우 폼으로, 기존 왁스와 실런트를 유지하면서 세차 스크래치 없이 도장면을 깊이 세정합니다. 이중 레이어 거품이 표면에 밀착되어 최대 10분간 오염물을 부드럽게 분해·제거합니다.
- Brand
- Griot's Garage
- Categories
- Exterior : Foam, Exterior : Bucket Car Shampoo
- Primary dilution
- 1:20
Key features
- pH-neutral to preserve existing waxes and sealants
- Avoids wash-induced scratches
- Dual-layer foam extends dwell time up to 10 minutes
- Primary foam softens road film and organic contaminants
- Secondary foam lifts and carries abrasives away
- Formulated for THE BOSS Foam Cannon Auto-Mix system
Dilution
- Exterior : Foam — 1:20 (1:20) (primary)
Usage
- Attach the Foaming Surface Wash bottle to THE BOSS Foam Cannon (Auto-Mix) or pre-mix at 20:1 in the supplied jar.
- With the vehicle surface dry and cool, maintain a distance of 3–4 feet and apply foam from rocker panels to the roof using slow, overlapping passes.
- Allow the foam to dwell for 5–10 minutes; do not let it dry on the surface.
- Switch to a green 25° nozzle and rinse from the rocker panel to the roof, then top to bottom, removing all foam residue.
핵심 특징
- pH 중성으로 기존 왁스·실런트 보존
- 세차 스크래치 방지
- 이중 레이어 거품으로 최대 10분 유지 시간
- 1차 거품이 도로 오염물·유기 오염물 연화
- 2차 거품이 이물질 부상 및 제거
- THE BOSS 폼 캐논 오토믹스 시스템 전용 포뮬라
사용법
- 포밍 서피스 워시 병을 THE BOSS 폼 캐논(오토믹스)에 장착하거나 전용 용기에 20:1 비율로 희석합니다.
- 차량 표면이 건조하고 서늘한 상태에서, 90~120cm 거리를 유지하며 로커 패널에서 루프 방향으로 천천히 겹쳐 분사합니다.
- 거품을 5~10분간 유지합니다. 표면에서 건조되지 않도록 주의합니다.
- 25° 녹색 노즐로 교체하고 로커 패널에서 루프, 다시 루프에서 아래 방향으로 고압 린스하여 거품을 완전히 제거합니다.